00197902-03_UM_X-Serie-S_EN.pdf - 第119页
User manual SIPLACE X-Series 3 Technical data and assemblies From software version 710.0 Edition 12/2016 3.1 Performance data 119 3.1.10 Component supply 3 T ape reel diameter S tandard Maximum to 432 mm (17“) 483 mm (19…
3 Technical data and assemblies User manual SIPLACE X-Series
3.1 Performance data From software version 710.0 Edition 12/2016
118
3.1.9 Board conveyor data for SIPLACE X4 S micron / X4i S micron
3
Single conveyor Flexible dual con-
veyor
Dual conveyor in sin-
gle conveyor mode
Board dimensions
(length x width)
X4 S micron - standard 50 mm x 50 mm to
450mm x 560mm
50 mm x 50 mm to
450 mm x 320 mm
50 mm x 50 mm to
450 mm x 560 mm
X4i S micron - standard
*a
50 mm x 50 mm to
380mm x 560mm
50 mm x 50 mm to
450 mm x 300 mm
50 mm x 50 mm to
450 mm x 510 mm
50 mm x 50 mm to
450mm x 510mm
50 mm x 50 mm to
380 mm x 320 mm
--
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 170
PCB weight
*b
Standard Max. 3.0 kg Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface
Standard
Option
SMEMA
Siemens
Component-free PCB handling edge 3 mm
PCB changeover time
Single conveyor
Dual conveyor
*c
< 1.5 seconds
0 seconds
*)a I-PLacement and alternating placement mode are possible with board lengths up to 380 mm. Only alternating placement
mode is possible for boards longer than 380 mm.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series, be aware that there is limited room between the two
machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
User manual SIPLACE X-Series 3 Technical data and assemblies
From software version 710.0 Edition 12/2016 3.1 Performance data
119
3.1.10 Component supply
3
Tape reel diameter
Standard
Maximum
to 432 mm (17“)
483 mm (19“)
Max. component supply
4 component trolleys X on the SIPLACE X2 S / X3 S / X4 S
4 component trolleys X on the SIPLACE X4i S
4 component trolleys X on the SIPLACE X4 S micron
4 component trolleys X on the SIPLACE X4i S micron
160 feeder modules, each with 8 mm X
148 feeder modules, each with 8 mm X
160 feeder modules, each with 8 mm X
148 feeder modules, each with 8 mm X
Component trolley changeover time < 1 minute
Feeder module types (SIPLACE X) with adapter Tape feeder modules, reject conveyors, stick
magazine and label presenters.
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series, be aware that there is limited room between the two
machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
3 Technical data and assemblies User manual SIPLACE X-Series
3.2 Ambient conditions and connection values From software version 710.0 Edition 12/2016
120
3.2 Ambient conditions and connection values
3.2.1 Ambient conditions for packaging, transportation and storage
3
3.2.2 Ambient conditions for machine operation
3
Temperature range Between -25°C and 55°C
Atmospheric humidity Up to 95%
Ambient pressure Up to 3000 m height without pressure equalization
Room temperature Between 15°C and 35°C
Atmospheric humidity 30% to 75%
(on average not higher than 45%, so that there is no risk of
condensation on the machine.)
Ambient pressure > 750 mbar (corresponds to 2500 m above mean sea level)