00197902-03_UM_X-Serie-S_EN.pdf - 第309页

User manual SIPLACE X-Series 5 Working with the machine From software version 710.0 Ed ition 12/2016 5. 15 Docking the component trolley in or out 309 5.15.2 Docking out the component trolley  Press the button on the re…

100%1 / 416
5 Working with the machine User manual SIPLACE X-Series
5.15 Docking the component trolley in or out From software version 710.0 Edition 12/2016
308
5
Fig. 5.15 - 1 Safety instructions for docking the component trolley in or out (example of SIPLACE X2 S / X3 S / X4 S
shown)
In addition, the component trolley can only be docked in if the protective
covers are closed.
(1) Button for docking and undocking the component trolley at location 1
(T) Direction of PCB transport
(1)
User manual SIPLACE X-Series 5 Working with the machine
From software version 710.0 Edition 12/2016 5.15 Docking the component trolley in or out
309
5.15.2 Docking out the component trolley
Press the button on the respective machine location until the component trolley is completely
undocked.
Swivel the two handles up (item 1 in fig. 5.15 - 2).
5
Fig. 5.15 - 2 Component trolley - swivel handles up to push
With both hands on the handles, pull the component trolley out of the machine.
5.15.3 Safety instructions for moving the component trolley
5
Always hold the handles with both hands when you want to move the component trolley.
Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.
WARNING
Avoid accidents!
To prevent accidents, ALWAYS follow the rules listed below when you move the compo-
nent trolley.
5 Working with the machine User manual SIPLACE X-Series
5.15 Docking the component trolley in or out From software version 710.0 Edition 12/2016
310
5.15.4 Docking the component trolley
5
Fig. 5.15 - 3 Component trolley and COT insert, SIPLACE X-Series
(1) Component trolley docking unit, SIPLACE X-Series
(2) Component trolley, SIPLACE X-Series
(3) Locking latches
5
CAUTION
Pushing in component trolley!
When pushing in the component trolley, make sure that you do not hit obstacles with
the locking latches (item 3 in fig. 5.15 - 3
, page 310).