00197902-03_UM_X-Serie-S_EN.pdf - 第82页
2 Operational safety User manual SIPLACE X-Series 2.5 Safety instructions for operating the ma chine From softwa re version 710.0 Edition 12/2016 82 2.5.8 High temperatures on the X feeder modules during c ontinuous oper…
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.5 Safety instructions for operating the machine
81
2.5.7 High temperatures on C&P20/M/P placement head during continuous oper-
ation
2
Fig. 2.5 - 2 High temperatures on SpeedStar (C&P20/C&P 20 M/C&P20 P) during continuous operation
(1) Temperature label, item no. 03031926-01
(2) Housing for the star motor
(3) Handle
2
CAUTION
Risk of burns due to high temperatures!
The housing of the star motor and the handle on the placement head may become very
hot during continuous operation and in ambient temperature in excess of 22 °C.
Be careful when touching the parts.
2 Operational safety User manual SIPLACE X-Series
2.5 Safety instructions for operating the machine From software version 710.0 Edition 12/2016
82
2.5.8 High temperatures on the X feeder modules during continuous operation
2
Fig. 2.5 - 3 High temperatures on the X feeder modules during continuous operation
(1) Temperature label, item no. 03031926-01
(2) Stepping motor
2
CAUTION
Risk of burns due to high temperatures!
The stepping motors can become very hot during continuous operation and in an ambient
temperature in excess of 22 °C.
Be careful when touching the motors.
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.5 Safety instructions for operating the machine
83
2.5.9 Safety instructions for manual movement of Z axis on TwinStar
2
2
Fig. 2.5 - 4 Risk of crushing by return unit on TwinStar
(1) Return unit, compressed air cylinder
(2) Piston rod
(3) Bumper of the return unit
(4) Risk of crushing finders here
CAUTION
Risk of crushing on TwinStar due to spring force of cylinder!
The strong spring tension of the cylinder moves the bumper back very quickly and could
injure your fingers. The same warning applies to the inside of the TwinStar, when the pis-
ton rod moves back to its original position.
NEVER move the Z axis down with your hand at the bumper of the return unit.