00197902-03_UM_X-Serie-S_EN.pdf - 第71页

User manual SIPLACE X-Series 2 Operational safety From software version 710.0 Edition 12/2016 2.2 Warning labels 71 2.2.9 High temperatures on th e Head Control Unit (HCU) 1 in fig. 2.2 - 12 , temperature label, item no.…

100%1 / 416
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 710.0 Edition 12/2016
70
2.2.8.1 High temperatures on the SIPLACE CPP
2
1 in fig. 2.2 - 11, page 69 (quantity per SIPLACE CPP: 1)
2.2.8.2 Laser class 2 on the component sensor
2
W laser class 2 in fig. 2.2 - 11, page 69, item no. 03134118-01 (quantity per CPP: 1)
2
High temperatures on the SIPLACE CPP during continuous operation
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures during
continuous operation, if the ambient temperature is greater than 22°C.
Be careful when touching the parts.
2
2
2
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.2 Warning labels
71
2.2.9 High temperatures on the Head Control Unit (HCU)
1 in fig. 2.2 - 12, temperature label, item no. 03031926-01 (quantity per machine: 4).
2
Fig. 2.2 - 12 Temperature label on the Head Control Unit (HCU) - (example of SIPLACE X4i S shown)
2
RISK OF BURNS DUE TO HIGH TEMPERATURES!
The housing of the Head Control Unit (HCU) can become hot during contin-
uous operation. Take care when touching the Head Control Unit (HCU).
(1)
(1)
(1)
(1)
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 710.0 Edition 12/2016
72
2.2.10 "Head crash" label on the IC camera of the TwinStar
"Head crash" label in fig. 2.2 - 13, item no. 03015392-02
(quantity per machine: maximum 2)
2
Fig. 2.2 - 13 "Head crash" label on the IC camera of the TwinStar
(1) Camera housing
(2) Glass plate
(3) "Head crash" label on the IC camera of the TwinStar
WARNING RISK OF HEAD CRASH 2
When changing the placement head from a TwinStar/VHF to a
SpeedStar, the SpeedStar collides with the camera housing.
Dismantle the stationary component cameras of type 33, 55 x 45,
and type 25, 16 x 16 for the TwinStar.
(3)