00197902-03_UM_X-Serie-S_EN.pdf - 第81页
User manual SIPLACE X-Series 2 Operational safety From software version 710.0 Edition 12/2016 2.5 Sa fety instructions for operating the machine 81 2.5.7 High temperatures on C&P20/M/P placement head during continuou…
2 Operational safety User manual SIPLACE X-Series
2.5 Safety instructions for operating the machine From software version 710.0 Edition 12/2016
80
2.5.6 Safety instructions for using the nozzle changer
Observe the following instructions to avoid risk of collision between the placement head and the
nozzle changer.
2
2
WARNING
Risk of head crashes with mixed configurations!
There is a risk of head crashes with mixed configurations.
Only install the associated nozzle changer for each placement head, with the nozzle
magazines for the respective placement head.
WARNING
Risk of head crashes with protruding lever!
A lever which projects above the magazine could lead to a placement head crash.
You should therefore make sure that the lever does not protrude over the maga-
zines.
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.5 Safety instructions for operating the machine
81
2.5.7 High temperatures on C&P20/M/P placement head during continuous oper-
ation
2
Fig. 2.5 - 2 High temperatures on SpeedStar (C&P20/C&P 20 M/C&P20 P) during continuous operation
(1) Temperature label, item no. 03031926-01
(2) Housing for the star motor
(3) Handle
2
CAUTION
Risk of burns due to high temperatures!
The housing of the star motor and the handle on the placement head may become very
hot during continuous operation and in ambient temperature in excess of 22 °C.
Be careful when touching the parts.
2 Operational safety User manual SIPLACE X-Series
2.5 Safety instructions for operating the machine From software version 710.0 Edition 12/2016
82
2.5.8 High temperatures on the X feeder modules during continuous operation
2
Fig. 2.5 - 3 High temperatures on the X feeder modules during continuous operation
(1) Temperature label, item no. 03031926-01
(2) Stepping motor
2
CAUTION
Risk of burns due to high temperatures!
The stepping motors can become very hot during continuous operation and in an ambient
temperature in excess of 22 °C.
Be careful when touching the motors.