00197902-03_UM_X-Serie-S_EN.pdf - 第326页

6 Station extensions User manual SIPLACE X-Series 6.1 Nozzle changer From software version 710.0 Edition 12/2016 326 6.1.3.4 Configuration example: C&P20 P for SI PLACE X4 S Locations 1, 2, 3 and 4 can eac h accommod…

100%1 / 416
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.1 Nozzle changer
325
6.1.3.2 Nozzle changer for C&P20 P with 4 magazines
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
Item no. 03101503-xx Nozzle magazine 40xx with 20 garages
6
Fig. 6.1 - 10 Nozzle changer for the SIPLACE SpeedStar C&P20 P with 4 magazines
6.1.3.3 Technical data
6
Nozzle changer for the SIPLACE SpeedStar (C&P20 P)
Number of magazines
*a
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
*)a All magazines in the nozzle changer must be configured.
6
4
Number of nozzle holders
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
120
80
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
6 magazines with 120 nozzle garages
4 magazines with 80 nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 80 nozzle garages
Nozzle types 40xx
6 Station extensions User manual SIPLACE X-Series
6.1 Nozzle changer From software version 710.0 Edition 12/2016
326
6.1.3.4 Configuration example: C&P20 P for SIPLACE X4 S
Locations 1, 2, 3 and 4 can each accommodate one nozzle changer for the SpeedStar (item 1 in
fig. 6.1 - 11
, page 326).
6
Fig. 6.1 - 11 Position of nozzle changer for the SIPLACE SpeedStar machine - configuration example (SIPLACE X4
S)
6
6
6.1.3.5 Nozzle changer "row 2" for the SIPLACE SpeedStar
The "nozzle changer for row 2" option enables you to configure an additional row of nozzle chang-
ers for the SIPLACE SpeedStar C&P20 P. The retrofit package contains the nozzle changer and
an assembly kit.
(1) Nozzle changer
(2) SIPLACE SpeedStar
PLEASE NOTE
Stop machine if magazine missing
The safety circuit stops the machine if magazines are missing or not fitted correctly.
Use all magazine places.
(2)
(1)
(1)
(2)
(1)
(2) (2)
(1)
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.1 Nozzle changer
327
6.1.3.6 Assembly
The nozzle changers are fixed in each case to the COT insert.
Align the nozzle changer so that the sloping side points towards the component trolley COT
insert.
6
6.1.3.7 Notes on operation
When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
6
Open the locking plate and place the nozzles in the nozzle holders.
Close the locking plate so that the nozzles cannot drop out of the magazines.
6
6
Programming the nozzle changer is described in the SIPLACE Pro user manual.
WARNING
Risk of head crashes with mixed configurations!
There is a risk of head crashes with mixed configurations.
Only install the associated nozzle changer for each placement head, with the nozzle
magazines for the respective placement head.
PLEASE NOTE
Fill the magazines off the machine and always replace complete magazines.
CAUTION
Filling up magazines!
Before you fill magazines, make sure that all the nozzles on the Collect&Place head
have
been returned to their magazines.
PLEASE NOTE
Risk of jamming!
If components fall onto magazines, there is a risk that the locking plate could jam.
Do not allow components to drop onto the magazines.
You should therefore regularly clean the magazines and free locations.