00197902-03_UM_X-Serie-S_EN.pdf - 第353页
User manual SIPLACE X-Series 6 Station extensions From software version 710.0 Ed ition 12/2016 6.4 Matrix tray changer 353 6.4.4.1 Dimensions 6 Fig. 6.4 - 1 Matrix tray changer , di mensions, all data in millimeters
6 Station extensions User manual SIPLACE X-Series
6.4 Matrix tray changer From software version 710.0 Edition 12/2016
352
6.4.3.2 Electrical ratings
6
6.4.3.3 Noise emissions
6
6.4.3.4 Permitted environmental factors
6
6.4.4 Installation notes for the MTC
In SIPLACE X2 S / X3 S / X4 S machines, an MTC can be docked onto location 2 in place of the
component trolley. To achieve this, the COT insert for the component trolley is replaced with the
docking unit for the MTC. If you want to use this MTC somewhere else, the free location can then
be configured again with a component trolley.
6
Supply voltage 3 x 200 V~ ± 5%; 50/60 Hz (Japan)
3 x 208 V~ ± 5%; 50/60 Hz (U.S.A.)
3 x 400 V~ ± 5%; 50/60 Hz (Europe)
Overall power 1.5 kW
Max. noise emissions 74 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity 30 - 75 %
(on average not higher than 45%, so that there is no
risk of condensation on the machine.)
PLEASE NOTE
Configuration options for MTC
– The MTC can not be configured with a CPP head.
– The MTC can only be configured at location 2 in SIPLACE X2 S / X3 S / X4 S ma-
chines.
– SIPLACE X2 S / X3 S / X4 S machines must have a service flap installed. See “Po-
sition of protective switches on the machine” on page 92.
– The MTC can be configured with the Twin Head and the stationary cameras of type
33, 25 or the 3D coplanarity sensor.
– Only 12 nozzle magazines can be used for configurations with an MTC.
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.4 Matrix tray changer
353
6.4.4.1 Dimensions
6
Fig. 6.4 - 1 Matrix tray changer, dimensions, all data in millimeters
6 Station extensions User manual SIPLACE X-Series
6.4 Matrix tray changer From software version 710.0 Edition 12/2016
354
6.4.4.2 Controls
6
Fig. 6.4 - 2 Matrix tray changer, back view
(1) Main switch
(2) EMERGENCY STOP button
(3) Tower 1 for accommodating max. 30 waffle pack tray carriers (up to 60 JEDEC trays)
(4) Tower 2 for accommodating max. 40 waffle pack tray carriers (up to 40 JEDEC trays)
(5) Attachment point for crank used to adjust the matrix tray changer height