00197902-03_UM_X-Serie-S_EN.pdf - 第388页
6 Station extensions User manual SIPLACE X-Series 6.14 Smart Pin Support From software version 710.0 E dition 12/2016 388 6.14 Smart Pin Support Item no. 001 19999-xx Smart Pin Su pport, X3 S Item no. 001 19993-xx Smart …
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.13 Support pin
387
6.13 Support pin
Item no. 00119680-xx Support pin
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting support pins on the lifting table.
6
Fig. 6.13 - 1 Support pin
6 Station extensions User manual SIPLACE X-Series
6.14 Smart Pin Support From software version 710.0 Edition 12/2016
388
6.14 Smart Pin Support
Item no. 00119999-xx Smart Pin Support, X3 S
Item no. 00119993-xx Smart Pin Support, X4 S
Item no. 00119994-xx Smart Pin Support, X4i S
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting support pins on the lifting table.
The support pins are automatically placed on the lifting table with the help of the Smart Pin Sup-
port option. A gripper unit is used to pick the support pins up from special magazines and place
them in the prescribed positions.
6
Fig. 6.14 - 1 Support pin
PLEASE NOTE
Reducing the hazard area
The Smart Pin Support option can be configured for SIPLACE X3 S / X4 S machines.
The Smart Pin Support option reduces the travel range of gantry 1 and 3 in both place-
ment areas by 36 mm in each case.
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.14 Smart Pin Support
389
6
Fig. 6.14 - 2 Gripper unit for Smart Pin Support
The gripper unit is fitted to the gantry. This gripper unit picks the support pins up from the pre-
scribed magazine and positions them on the lifting table. The positions of the support pins in the
machine can be defined for each board side, in the SIPLACE Pro Board Editor.
There are two different magazines available for automatic changeover of max. 10 support pins in
the various machine configurations. These magazines are fixed to a magazine holder and are fit-
ted to the component trolley COT insert.
– Smart Pin Support - magazine type Q10 [item no. 00119997-xx]
– Smart Pin Support - magazine type W5 [item no. 00119998-xx]
PLEASE NOTE
For a detailed description, see the "Smart Pin Support User Manual", German+English
[item no. 00197001-xx]