00197902-03_UM_X-Serie-S_EN.pdf - 第70页
2 Operational safety User manual SIPLACE X-Series 2.2 Warning labels From software version 710.0 Edition 12/2016 70 2.2.8.1 High temperatures on the SIPLACE CPP 2 1 in fig. 2.2 - 1 1 , page 69 (quantity pe r SIPLACE CPP:…
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.2 Warning labels
69
2.2.8 Warning labels on the SIPLACE MultiStar CPP
2
Fig. 2.2 - 11 Warning labels on the SIPLACE MultiStar CPP
(1) Temperature label, item no. 03031926-01
Item W laser class 2, item no. 03134118-01
(1)
W Laser class 2
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 710.0 Edition 12/2016
70
2.2.8.1 High temperatures on the SIPLACE CPP
2
1 in fig. 2.2 - 11, page 69 (quantity per SIPLACE CPP: 1)
2.2.8.2 Laser class 2 on the component sensor
2
W laser class 2 in fig. 2.2 - 11, page 69, item no. 03134118-01 (quantity per CPP: 1)
2
High temperatures on the SIPLACE CPP during continuous operation
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures during
continuous operation, if the ambient temperature is greater than 22°C.
Be careful when touching the parts.
2
2
2
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.2 Warning labels
71
2.2.9 High temperatures on the Head Control Unit (HCU)
1 in fig. 2.2 - 12, temperature label, item no. 03031926-01 (quantity per machine: 4).
2
Fig. 2.2 - 12 Temperature label on the Head Control Unit (HCU) - (example of SIPLACE X4i S shown)
2
RISK OF BURNS DUE TO HIGH TEMPERATURES!
The housing of the Head Control Unit (HCU) can become hot during contin-
uous operation. Take care when touching the Head Control Unit (HCU).
(1)
(1)
(1)
(1)