80S-15贴片机.pdf - 第14页

1 Operational Safety SIPLACE 80 S/F/G Service Manual Edition 04/97 1 - 2

SIPLACE 80 S/F/G Service Manual 1 Operational Safety

Edition 04/97

1 - 1

1 Operational Safety

1 Operational Safety SIPLACE 80 S/F/G Service Manual

Edition 04/97

1 - 2

SIPLACE 80 S/F/G Service Manual 1 Operational Safety

Edition 04/97

1 - 3

1.1 Safety Instructions

1.1.1 Danger and Warning Notes

DANGER

OOO

All locations on the components tables must be equipped with feeders if adequate operational safety is to be

assured. If not enough feeders are available you will need to fit ’dummy feeders’ (Item Nos. 00116820-01,

00116821-01 or 00116822-01) as safety guard.

DANGER

QQQ

The machine is electrically powered. When electrical equipment is operating, certain parts will necessarily be

carrying voltages which are potentially fatal.

For this reason before carrying out any work on parts which carry current it is essential that the machine be

switched off at the main switch and disconnected from the main power supply.

Failure to comply with danger or warning notes may result in death, serious physical injury and / or consider-

able damage to property.

WARNING

In addition you must comply with the following points if optimum operational safety is to be assured:

Never open either of the covers unless you are absolutely familiar with the operation and functions of the

machine. You should only open covers when you are asked to do so by the service manual.

The key-operated switch may only be unlocked by qualified and trained personnel.

The key-operated switch should also only be unlocked when you are asked to do so by the service man-

ual.

When a station is switched on, never put your head or arms inside the gantry’s range of travel.

Do not ever make modifications of any kind whatsoever unless you are absolutely clear on the effects they

will have on the overall functioning of the machine.

Only correspondingly trained personnel should set up, refit and maintain the stations.

Do not use any parts except Siemens original spares and accessories authorized by Siemens AG. Use of

other parts will affect safety and may cancel liability for any ensuing consequences.

The operational safety of SMD placement machines is only ensured when the SMD machines are used for

the purpose intended and the information in the user and service manuals is observed.

Keep the machine key and the key for the key-operated switch in a place where they cannot be accessed

by unauthorized persons.

If work is needed on the machine and you do not have personnel adequately trained for this, it is essential

that you have this work done by a service engineer from Siemens. Please remember that working on the

machine without knowing what you are doing will not save money but may actually result in high costs.