80S-15贴片机.pdf - 第256页
8 IC Head SIPLACE 80S/F/G Servic e Manual Edition 01/97 8 - 8 Fig. 8.2.2 IC head board, va cuum sensor, conne ctors and m easuring points.
SIPLACE 80S/F/G Service Manual 8 IC Head
Edition 01/97
8 - 7
On the solenoid valve, there is a small, light-red push-button (item A, Fig. 8.2.1 page 8 - 4). This is used to
disable the clamping while the automatic placement machine is running.
WARNING
∆
!
∆
!
∆
!
Do not move the disabled z axis manually unless the clamping device has been deactivated. The compressed
air supply must first have reached working pressure.
To deactivate, press the red push-button on the solenoid valve. If you do not follow this warning, the sleeve
clamping device may be damaged.
8.2.3.4 IC Head Board
The IC head board contains the vacuum analysis device, the push-lock terminals for the axes, the solenoid
valves of the IC head, etc. See also Fig. 8.2.2.
8 IC Head SIPLACE 80S/F/G Service Manual
Edition 01/97
8 - 8
Fig. 8.2.2 IC head board, vacuum sensor, connectors and measuring points.
SIPLACE 80S/F/G Service Manual 8 IC Head
Edition 01/97
8 - 9
8.3 Servicing Work on the Z Axis
8.3.1 Tools, Equipment and Consumables
8.3.2 Spare Parts
8.3.3 Replace the Toothed Belt
See item 7 in Fig. 8.3.1 page 8 - 12
●
Loosen the synchronizing disc to slacken off the toothed belt.
●
Replace the toothed belt.
●
Adjust the tension of the toothed belt until the belt tension measuring device displays a frequency of
190Hz ± 5Hz.
●
Check the zero point correction value and the axis servo setting.
From item number
Hexagon socket screw key, set
Open-ended spanner, size 13
Mount for sleeve removal 00318297-01
BRECO belt tension measuring device, complete 00326015-01
Feeler gauges 0.5 mm - 1.0 mm
SITEST program
Adjusting Instructions
Loctite 241 screw adhesive 02101037-01
From item number
Synchroflex 6T2/220 toothed belt 00304069-01
Motor for z axis 00306385-02
Spring steel sheet (nozzle support) 00304037-05
End position BERO 3RG4/6.5 mm/sn = 1.5 mm/1S 00306432-01
IC head sleeve, complete 00310555-01