80S-15贴片机.pdf - 第385页

SIPLACE 80S/F/G Service Manual 9 Revolver Head Edition 04/97 9 - 101 Fig. 9.12.3 Fitting the revolver head to the head support on the gantry Key to F ig. 9 .12.3 1 Cover 4 Paralle l pin s 2 M3 hexago n socke t-head s cre…

100%1 / 484
9 Revolver Head SIPLACE 80S/F/G Service Manual
Edition 04/97
9 - 100
Fig. 9.12.2 Compressed air lines on the vacuum generator block
Key to Fig. 9.12.2
1 Vacuum generator block 2 Quick-release couplings for the compressed air lines
1
2
SIPLACE 80S/F/G Service Manual 9 Revolver Head
Edition 04/97
9 - 101
Fig. 9.12.3 Fitting the revolver head to the head support on the gantry
Key to Fig. 9.12.3
1 Cover 4 Parallel pins
2 M3 hexagon socket-head screw 5 Head support on the gantry
3 Placement head
1
2
5
4
4
2
2
3
9 Revolver Head SIPLACE 80S/F/G Service Manual
Edition 04/97
9 - 102
9.12.4 Fitting the placement head
●
Reverse the above sequence to install.
PLEASE NOTE:
Note the coding on the plugs when you reconnect the connectors on conversion board Y0005.
CAUTION
O
• Ensure that the cables are not damaged and that there is no strain on the clamped connections.
• Check that all the contacts of all connectors are seated correctly.
• Fix all the cables with cables ties once more.
9.12.5 Adjustments
●
Calibrate the placement head using the SITEST program.
●
Carry out the adjustments in accordance with the adjustment instructions.