Xg系列调整手册.pdf - 第4页
1 Ho w to use this manual 1- 3 1. About this manual This manual is intended for supervisors or managers of the machines and explains the procedures for adjusting and calibrating the YAMAHA surface mounters using the Full…
Table of Contents
1. About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2. Contents of each chapter. . . . . . . . . . . . . . . . . . . . . . . . . 1-4
3. Page layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
4. Applicable models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Chapter 1 How to use this manual
1
How to use this manual
1-3
1. About this manual
This manual is intended for supervisors or managers of the machines and explains the procedures for
adjusting and calibrating the YAMAHA surface mounters using the Full Auto Mount Feedback (FAMF)
program. Make sure you fully understand the machine settings and conditions before beginning
adjustments.
c
CAUTION
Machine conditions or circumstances during adjustments may adversely affect the machine
accuracy. Do not make adjustments under conditions or in an environment that greatly differs
from the actual production environment. Also be sure to make a data backup prior to adjust-
ments.
w
WARNING
WHEN ADJUSTING AN ITEM LOCATED WITHIN THE HEAD ASSEMBLY MOVEMENT RANGE,
ALWAYS MAKE SURE THE MACHINE IS IN EMERGENCY STOP AND ALSO PLACE A SIGN
INDICATING “ADJUSTMENT IN PROGRESS” TO WARN OTHER WORKERS NOT TO TURN ON
POWER TO THE MACHINE.
FOR INFORMATION ON HOW TO OPERATE THE XG SERIES SURFACE MOUNTERS, PRECAU-
TIONS TO TAKE DURING OPERATION AND ADJUSTMENTS, REFER TO THE SEPARATE XG
SERIES OPERATION MANUAL AND FOLLOW THE INSTRUCTIONS TO ENSURE SAFETY.
1
How to use this manual
1-4
2. Contents of each chapter
This manual consists of the following chapters.
Chapter 1 How to use this manual
Chapter 1 provides a brief guide to this manual to help you use it effectively, explaining
the contents of each chapter and the layout of a typical page.
Chapter 2 Before beginning adjustments
This chapter describes preparatory work necessary to make basic adjustments and FAMF
adjustments.
Chapter 3 Basic adjustments
Chapter 3 explains basic adjustments such as camera-related parameters, R-axis accuracy
offset and head offset, required to ensure high accuracy for FAMF adjustments.
Chapter 4 FAMF adjustments
This chapter explains the procedures for FAMF adjustments.
Appendix
Appendix at the end of this manual gives standard values obtained by FAMF adjustments.
Refer to these values as needed to verify whether results are satisfactory.