Dual Simultaneous Programmable Pitch Rev 02.pdf - 第58页

Dual-Simultaneous Pr ogrammable Pitch Owner ’s Manual Operation 54 © 2024 Nordson Corporation 13. In th e Fixture Con figuration s creen, click on Point er and s elect Applicator Left ( SC350 Applicator L eft shown in th…

Dual-Simultaneous Programmable Pitch Owner’s Manual Operation

11. Use the cursor to drag the instruction element down toward the lower left corner

(Figure 4-64).

Figure 4-64 Reposition Instruction Element

12. In the Edit Screen, select Configure > Fixtures (Figure 4-65).

Figure 4-65 Select Fixtures

Dual-Simultaneous Programmable Pitch Owner’s Manual Operation

13. In the Fixture Configuration screen, click on Pointer and select Applicator Left (SC350

Applicator Left shown in this example) (Figure 4-66).

Figure 4-66 Change Pointer

14. In the Fixture Configuration screen, click Teach Z (Figure 4-66).

15. Click Close.

16. Click on in the Coat menu and position the instruction element below the line created

earlier (Figure 4-67).

Figure 4-67 Position New Instruction Element

NOTE

The finished pattern should look similar to what is shown in Figure 4-68.

Dual-Simultaneous Programmable Pitch Owner’s Manual Operation

Figure 4-68 Finished Pattern

17. Click on the program tree icon .

18. In the program tree, click on MAIN (Figure 4-69).

Figure 4-69 Select Main