SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第113页

User manual SIPLACE X-Series 3 Technical data and assemblies From software version 708.1 Version 05/2015 3.1 Performance data 113 3.1.10 Board conveyor dat a for SI PLACE X4 S micron / X4i S micron 3 Single conveyor Flex…

100%1 / 430
3 Technical data and assemblies User manual SIPLACE X-Series
3.1 Performance data From software version 708.1 Version 05/2015
112
3.1.9 PCB conveyor data SIPLACE X2 S / X3 S / X4 S / X4i S
3
Single conveyor Flexible dual con-
veyor
Dual conveyor in sin-
gle conveyor mode
Board dimensions
(length x width
*a
)
X2 S / X3 S / X4 S - standard 50 mm x 50 mm to
450 mm x 560 mm
50 mm x 50 mm to
450 mm x 320 mm
50 mm x 50 mm to
450 mm x 560 mm
X2 S / X3 S / X4 S - long board
*b
*c
50 mm x 50 mm to
850 mm x 560 mm
50 mm x 50 mm to
850 mm x 320 mm
50 mm x 50 mm to
850 mm x 560 mm
X4i S - standard
*d
50 mm x 50 mm to
380 mm x 560 mm
50 mm x 50 mm to
450 mm x 300 mm
50 mm x 50 mm to
450 mm x 510 mm
50 mm x 50 mm to
450 mm x 510 mm
50 mm x 50 mm to
380 mm x 320 mm
--
X4i S - long board
b
50 mm x 50 mm to
610 mm x 510 mm
50 mm x 50 mm to
610 mm x 300 mm
50 mm x 50 mm to
610 mm x 510 mm
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjust-
ment
Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 165
PCB weight
*e
Standard Max. 3.0 kg Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface
Standard
Option
SMEMA
Siemens
Component-free PCB handling
edge
3 mm
PCB changeover time
Single conveyor
Dual conveyor
*f
< 1.5 seconds
0 seconds
*)a When using board widths > 450 mm, make sure that the peripheral modules can also process these board widths.
*)b The "long board option" requires a license.
*)c Boards from 650 mm length require an additional input and output conveyor extension.
*)d I-PLacement and alternating placement mode are possible with board lengths up to 380 mm. Only alternating place-
ment mode is possible for boards longer than 380 mm.
*)e The board weight value refers to the weight of the board plus the weight of the components.
*)f 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series, be aware that there is limited room between the two
machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
User manual SIPLACE X-Series 3 Technical data and assemblies
From software version 708.1 Version 05/2015 3.1 Performance data
113
3.1.10 Board conveyor data for SIPLACE X4 S micron / X4i S micron
3
Single conveyor Flexible dual con-
veyor
Dual conveyor in sin-
gle conveyor mode
Board dimensions
(length x width
*a
)
X4 S micron - standard 50 mm x 50 mm to
450mm x 560mm
50 mm x 50 mm to
450 mm x 320 mm
50 mm x 50 mm to
450 mm x 560 mm
X4i S micron - standard
*b
50 mm x 50 mm to
380mm x 560mm
50 mm x 50 mm to
450 mm x 300 mm
50 mm x 50 mm to
450 mm x 510 mm
50 mm x 50 mm to
450mm x 510mm
50 mm x 50 mm to
380 mm x 320 mm
--
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjust-
ment
Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 165
PCB weight
*c
Standard Max. 3.0 kg Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface
Standard
Option
SMEMA
Siemens
Component-free PCB handling
edge
3 mm
PCB changeover time
Single conveyor
Dual conveyor
*d
< 1.5 seconds
0 seconds
*)a When using board widths > 450 mm, make sure that the peripheral modules can also process these board widths.
*)b I-PLacement and alternating placement mode are possible with board lengths up to 380 mm. Only alternating place-
ment mode is possible for boards longer than 380 mm.
*)c The board weight value refers to the weight of the board plus the weight of the components.
*)d 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series, be aware that there is limited room between the two
machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X-Series line with an input conveyor extension and the last
machine in the line with an output conveyor extension.
3 Technical data and assemblies User manual SIPLACE X-Series
3.1 Performance data From software version 708.1 Version 05/2015
114
3.1.11 Component supply
3
Tape reel diameter
Standard
Maximum
to 432 mm (17“)
483 mm (19“)
Max. component supply
4 component trolleys X on the
SIPLACE X2 S / X3 S / X4 S
4 component trolleys X on the SIPLACE X4i S
4 component trolleys X on the SIPLACE X4 S micron
4 component trolleys X on the SIPLACE X4i S micron
160 feeder modules, each with 8 mm X
148 feeder modules, each with 8 mm X
160 feeder modules, each with 8 mm X
148 feeder modules, each with 8 mm X
Component trolley changeover time < 1 minute
Feeder module types (SIPLACE X) with adapter Tape feeder modules, reject con-
veyors, stick magazine and label
presenters.