SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第61页

User manual SIPLACE X-Series 2 Operational safety From software version 708.1 Version 05/2015 2.2 Warning labe ls 61 2.2.4 W arning label W205 on the tape cutter 2 Fig. 2.2 - 5 Warning label W205 on the top of the tape c…

100%1 / 430
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 708.1 Version 05/2015
60
2.2.3.1 Warning label 202
2
W202, in fig. 2.2 - 4, page 59, item no. 03009341-01
(quantity per machine: 4)
2
2
2
CAUTION
Data loss due to powerful magnetic fields!
There is a risk that the powerful magnetic fields could corrupt data on data media or credit
cards and check cards.
Keep data carriers and check cards away from the machine.
DANGER
Danger to life from powerful magnetic fields inside the machine!
When protective covers are opened inside the machine, the life of persons with the fol-
lowing passive or active implants is put at risk:
– Pacemakers
– Defibrillators
– Insulin pumps etc.
At-risk people must not stand in the immediate vicinity of the machine.
WARNING
DANGER OF CRUSHING!
There is a danger of crushing for persons with passive metal implants (e.g. plates,
screws).
Never reach into the machine when the protective covers are open and do not bend
over the open machine.
Do not bring any metal objects into the danger area.
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.2 Warning labels
61
2.2.4 Warning label W205 on the tape cutter
2
Fig. 2.2 - 5 Warning label W205 on the top of the tape cutter
W205, item no. 03009344-01
2
2
2
WARNING
Risk of cuts!
Risk of cuts from sharp blades when working on the tape cutter!
Wear robust protective gloves when working on the tape cutter.
WARNING
Risk of injuries!
Risk of injuries from pressurized compressed-air lines when working on the tape cutter.
Disconnect the machine from the mains supply and the compressed air supply, be-
fore you start work on the tape cutter.
Wait until the operating pressure has dropped to 0 MPa.
W205
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 708.1 Version 05/2015
62
2.2.4.1 Warning label W205 on the used tape chute
2
Fig. 2.2 - 6 Warning label W205 on the used tape chute
W205, item no. 03009344-01
2.2.4.2 Warning label 205
Warning labels on tape cutter and used tape chute
2
W205 in fig. 2.2 - 5, page 61 and 2.2 - 6, page 62, item no. 03009344-01 (quantity per machine: 8)
W205
2
2
2
2
2
2
2
2
RISK OF CUTTING!
Danger of cutting is present even when the machine is switched
off