SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第78页
2 Operational safety User manual SIPLACE X-Series 2.5 Safety instructions for operating the ma chine From software version 708 .1 Version 05/2015 78 2.5.10 Safety instructions for the component cameras of the T winSt ar …
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.5 Safety instructions for operating the machine
77
2.5.9 Safety instructions for manual movement of Z axis on TwinStar
2
2
Fig. 2.5 - 4 Risk of crushing by return unit on TwinStar
(1) Return unit, compressed air cylinder
(2) Piston rod
(3) Bumper of the return unit
(4) Risk of crushing finders here
CAUTION
Risk of crushing on TwinStar due to spring force of cylinder!
The strong spring tension of the cylinder moves the buffer back very quickly and could
injure your fingers. The same warning applies to the inside of the TwinStar, when the pis-
ton rod moves back to its original position.
NEVER move the Z axis down with your hand at the buffer of the return unit.
2 Operational safety User manual SIPLACE X-Series
2.5 Safety instructions for operating the machine From software version 708.1 Version 05/2015
78
2.5.10 Safety instructions for the component cameras of the TwinStar during place-
ment head change
2
2.5.11 Safety instructions for docking the component trolley in or out
2
2
2
2
WARNING
Risk of collisions!
When changing the placement head from a TwinStar/VHF to a SpeedStar, the SpeedStar
collides with the camera housing.
Dismantle the stationary component cameras of type 33, 55 x 45, and type 25, 16 x
16 for the TwinStar.
WARNING
Operation only with component trolley!
The placement machine may only be operated if there is a component trolley present
and docked at each location.
Fill any free locations with dummy feeder modules as described in
section 2.6.6
, page 93.
WARNING
DANGER OF CRUSHING!
Risk of crushing when docking and undocking the component trolley.
Always dock/undock the component trolley alone.
CAUTION
Risk of breaking handles!
Risk of breaking handles when transporting the component trolley.
When transporting the component trolley, do not lift it by its handles.
CAUTION
Risk of injuring limbs!
Risk of injuring limbs when docking and undocking.
When docking and undocking, make sure that there are no body limbs in the travel
area of the component trolley.
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.5 Safety instructions for operating the machine
79
2.5.12 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the component trolley for emptying. There is a risk
of catching your thumbs as you do so. To prevent this, observe the safety instructions in section
5.8.2
, page 293.