SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第402页
6 Station extensions User manual SIPLACE X-Series 6.15 Smart Pin Support From software version 708.1 Version 05/2015 402 6 Fig. 6.15 - 3 Smart Pin Support - magazine type Q10 6 Fig. 6.15 - 4 Smart Pin Support - magazine …
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.15 Smart Pin Support
401
6
Fig. 6.15 - 2 Gripper unit for Smart Pin Support
The gripper unit is fitted to the gantry. This gripper unit picks the support pins up from the pre-
scribed magazine and positions them on the lifting table. The positions of the support pins in the
machine can be defined for each board side, in the SIPLACE Pro Board Editor.
There are two different magazines available for automatic changeover of max. 10 support pins in
the various machine configurations. These magazines are fixed to a magazine holder and are fit-
ted to the COT insert.
– Smart Pin Support - magazine type Q10 [item no. 00119997-xx]
– Smart Pin Support - magazine type W5 [item no. 00119998-xx]
PLEASE NOTE
For a detailed description, see the "Smart Pin Support User Manual", German+English
[item no. 00197001-xx]
6 Station extensions User manual SIPLACE X-Series
6.15 Smart Pin Support From software version 708.1 Version 05/2015
402
6
Fig. 6.15 - 3 Smart Pin Support - magazine type Q10
6
Fig. 6.15 - 4 Smart Pin Support - magazine type W5
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.16 Long board option (LBO)
403
6.16 Long board option (LBO)
Item no. 519874-xx X-Series, LBO license
The "Long board" option allows you to place boards which exceed the specified board length.
6
PLEASE NOTE
The function of this option depends on the board geometry.