SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第17页
User manual SIPLACE X-Series 1 Introduction From software version 708.1 Version 05/2015 17 1 Introduction This user manual is a guide or refe rence work for oper ating and setting up the SIPLACE ® X-Series S placement ma…
Contents User manual SIPLACE X-Series
From software version 708.1 Version 05/2015
16
User manual SIPLACE X-Series 1 Introduction
From software version 708.1 Version 05/2015
17
1 Introduction
This user manual is a guide or reference work for operating and setting up the
SIPLACE
®
X-Series S placement machines.
The X-Series S placement machines are available in six different variants.
– SIPLACE X4i S
–SIPLACE X4 S
– SIPLACE X4i S micron
– SIPLACE X4 S micron
–SIPLACE X3 S
–SIPLACE X2 S
The numbers in the type name indicate the number of gantries used. Each gantry has one place-
ment head.
This document is the original user manual.
1
1
The header of each chapter contains the release and software version, to which this manual ap-
plies.
PLEASE NOTE
The SIPLACE X-Series S placement machines have a largely identical design; any dif
-
ferences will be explicitly indicated.
To view the available configurations and options, refer to the specifications for the
relevant SIPLACE X-Series S machines and the specifications for the SIPLACE X4
S micron / X4i S micron machines.
The diagrams in this user manual generally show the SIPLACE X4 S or X4i S machine.
These diagrams also apply to the SIPLACE X2 S / X3 S, SIPLACE X4 S micron or SI-
PLACE X4i S micron machines. In the event of deviations, a corresponding diagram will
be shown.
1 Introduction User manual SIPLACE X-Series
1.1 Machine overview From software version 708.1 Version 05/2015
18
1.1 Machine overview
1.1.1 SIPLACE X4i S
1
Fig. 1.1 - 1 SIPLACE X4i S placement machine
The SIPLACE X4i S placement machine is distinguished by
– High precision,
– Intelligent placement optimization,
– Intelligent configuration strategies,
– Placement performance up to the high end process range