SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第321页

User manual SIPLACE X-Series 5 Working with the machine From software version 708.1 Version 05/2015 5.15 Docking the component trolley in or out 321 5 Fig. 5.15 - 2 C omponen t trolley - swivel ha ndles up to push  With…

5 Working with the machine User manual SIPLACE X-Series

5.15 Docking the component trolley in or out From software version 708.1 Version 05/2015

320

Fig. 5.15 - 1 Safety instructions for docking the component trolley in or out (example of SIPLACE X2 S / X3 S / X4 S

shown)

In addition, the component trolley can only be docked in if the protective

covers are closed.

(1) Button for docking and undocking the component trolley at location 1

(T) Direction of PCB transport

5.15.2 Docking out the component trolley

 Press the button on the respective machine location until the component trolley is completely

undocked.

 Swivel the two handles up (item 1 in fig. 5.15 - 2).

(1)

User manual SIPLACE X-Series 5 Working with the machine

From software version 708.1 Version 05/2015 5.15 Docking the component trolley in or out

321

Fig. 5.15 - 2 Component trolley - swivel handles up to push

 With both hands on the handles, pull the component trolley out of the machine.

5.15.3 Safety instructions for moving the component trolley

 Always hold the handles with both hands when you want to move the component trolley.

 Remember that a component trolley with the full complement of feeder modules can tip over

sideways or forward on gradients of 20° or more.

 Make sure that the surface on which the trolley is moved has a significantly smaller gradient.

 Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast

enough.

WARNING

Avoid accidents!

To prevent accidents, ALWAYS follow the rules listed below when you move the compo-

nent trolley.

5 Working with the machine User manual SIPLACE X-Series

5.15 Docking the component trolley in or out From software version 708.1 Version 05/2015

322

5.15.4 Docking the component trolley

Fig. 5.15 - 3 Component trolley and COT insert, SIPLACE X-Series

(1) Component trolley docking unit, SIPLACE X-Series

(2) Component trolley, SIPLACE X-Series

(3) Locking latches

CAUTION

Pushing in component trolley!

 When pushing in the component trolley, make sure that you do not hit obstacles with

the locking latches (item 3 in fig. 5.15 - 3

, page 322).