SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第28页
1 Introduction User manual SIPLACE X-Series 1.1 Machine overview From software version 708.1 Version 05/2015 28 1.1.6 SIPLACE X2 S 1 Fig. 1.1 - 6 SIPLACE X2 S placement machine The SIPLACE X2 S placeme nt machine is dist…
User manual SIPLACE X-Series 1 Introduction
From software version 708.1 Version 05/2015 1.1 Machine overview
27
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE X3 S placement machine has two placement areas, one single conveyor or one
dual conveyor. Two boards can be placed at the same time on dual conveyors.
There are four locations available for supplying components. These can be fitted with component
trolleys and configured with up to 40 tracks.
The SIPLACE X3 S placement machine has three gantries. The two gantries in placement area 1
point to location 4. The gantry in placement area 2 points to location 2.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
1.1.5.1 Overview of placement head configuration
1
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
Placement area 1 Placement area 2
C&P20 / C&P 20 C&P20
C&P20 / C&P 20 CPP_L
C&P20 / C&P 20 CPP_H
CPP_L/CPP_L CPP_L
CPP_H / CPP_H CPP_H
CPP_L/CPP_L CPP_H
C&P20 / C&P 20 TH
CPP_L/CPP_L TH
CPP_H / CPP_H TH
TH / TH TH
1 Introduction User manual SIPLACE X-Series
1.1 Machine overview From software version 708.1 Version 05/2015
28
1.1.6 SIPLACE X2 S
1
Fig. 1.1 - 6 SIPLACE X2 S placement machine
The SIPLACE X2 S placement machine is distinguished by
– High precision,
– Intelligent placement optimization,
– Intelligent configuration strategies,
– Placement performance up to the high end process range
User manual SIPLACE X-Series 1 Introduction
From software version 708.1 Version 05/2015 1.1 Machine overview
29
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE X2 S placement machine has two placement areas, one single conveyor or one
dual conveyor. Two boards can be placed at the same time on dual conveyors.
There are four locations available for supplying components. These can be fitted with component
trolleys and configured with up to 40 tracks.
The SIPLACE X2 S placement machine has two gantries. The gantry in placement area 1 points
to location 4. The gantry in placement area 2 points to location 2.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
1.1.6.1 Overview of placement head configuration
1
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
Placement area 1 Placement area 2
C&P20 C&P20
C&P20 CPP_L
C&P20 CPP_H
CPP_L CPP_L
CPP_H CPP_H
CPP_L CPP_H
C&P20 TH
CPP_L TH
CPP_H TH
TH TH