SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第52页

2 Operational safety User manual SIPLACE X-Series 2.2 Warning labels From software version 708.1 Version 05/2015 52 2.2 W arning labels The warning labels are m ade from sof t PVC film, and are abrasion-pro of, light-fas…

User manual SIPLACE X-Series 2 Operational safety

From software version 708.1 Version 05/2015 2.1 Safety instructions

 Always wear suitable work and protective clothing (e.g. gloves and safety shoes, etc) when

handling the magnet track.

 Only suitably trained SIPLACE engineers may carry out assembly work and other tasks when

replacing the magnet track.

 In case of emergencies, always have at least two blocks (approx. 10° to 15°) made of a solid,

nonmagnetic material (e.g. aluminum) and a nonmagnetic hammer (approx. 2 to 3 kg) avail-

able. These tools will be needed in an emergency to detach parts that are magnetically stuck

to the magnet track and possibly to release parts of the body caught between the two (fingers,

hand, foot). Never place the coil assembly of an iron-core motor directly on the magnet track.

 Electronic devices and measuring instruments may be damaged or destroyed by powerful

magnetic fields. Do not place devices that contain magnetic components in the vicinity of

computers, monitors or magnetic data media (e.g.hard disks, credit cards, audio or video

tapes, etc).

 Maintain a distance of at least 45 cm between individual magnet tracks or between a magnet

track and other magnetic surfaces.

 The magnets must be disposed of correctly. A key part of correct disposal is the complete de-

magnetization of the permanent magnets.

2 Operational safety User manual SIPLACE X-Series

2.2 Warning labels From software version 708.1 Version 05/2015

2.2 Warning labels

The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant

to water and weathering. The following diagrams show the SIPLACE X4 S machine. The position

of warning labels is the same for SIPLACE X4i S / X2 S / X3 S / X4i S micron and X4 S micron

machines.

User manual SIPLACE X-Series 2 Operational safety

From software version 708.1 Version 05/2015 2.2 Warning labels

2.2.1 Warning labels on the machine

Fig. 2.2 - 1 Warning labels on the machine - part 1 (example of SIPLACE X2 S / X3 S / X4 S shown)

W201, item no. 03009338-01

W203, item no. 03009342-01

W204, item no. 03009343-01

W210, item no. 03009350-01

W206, item no. 03009345-01

(T) Direction of PCB transport

W 203

W 210

W 204

W 201

W 204

W 206