SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual.pdf - 第377页

User manual SIPLACE X-Series 6 Station extensions From software version 708.1 Version 05/ 2015 6.5 Waffle pack changer (WPC5/WPC6) 377 6.5.9.1 Safety features EMERGENCY STOP button 6 After pressing the EMERGENCY STOP bu …

100%1 / 430
6 Station extensions User manual SIPLACE X-Series
6.5 Waffle pack changer (WPC5/WPC6) From software version 708.1 Version 05/2015
376
6.5.9 Controls
6
Fig. 6.5 - 4 WPC - controls
(1) EMERGENCY STOP button
(2) Main switch
(3) Crank for raising or lowering the chassis
(4) Safety door
(5) Waffle pack tray storage unit
(6) Non-stop module (WPC6 only)
(3)
(2)
(1)
(4)
(5)
(6)
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.5 Waffle pack changer (WPC5/WPC6)
377
6.5.9.1 Safety features
EMERGENCY STOP button 6
After pressing the EMERGENCY STOP button, the entire system, with SIPLACE machine and
waffle pack changer, is immediately stopped. After releasing the EMERGENCY STOP button, the
entire system can be restarted again by pressing the start button on the SIPLACE machine. Place-
ment can then be continued or terminated.
6
Safety door 6
When you open the protective door, the lifting axis and the feed axis of the Waffle Pack Changer
are stopped. When the door is closed again, the Waffle Pack Changer continues its operation.
6
Non-stop module (WPC6 only) 6
Waffle pack trays can be refilled or extracted during operations via the flap in the non-stop module,
without stopping the SIPLACE machine. The operating control indicates whether a waffle pack
tray is in the non-stop module, whether the non-stop module is empty or whether a waffle pack
tray is currently being moved.
6
PLEASE NOTE
Watch out for any incompletely placed PCBs.
CAUTION
Do not open the Waffle Pack Changer protective door while a component is being
picked up by the Waffle Pack Changer.
CAUTION
Triggering the emergency STOP by opening the flap!
If the operating control flashes, the waffle pack tray is being moved inside the non-stop
module and the activity has not yet been completed. Opening the flap triggers the emer-
gency STOP.
To open the flap, wait until the operating control is no longer flashing.
6 Station extensions User manual SIPLACE X-Series
6.6 SIPLACE JTF-S/JTF-M From software version 708.1 Version 05/2015
378
6.6 SIPLACE JTF-S/JTF-M
Item no. 00166670-xx SIPLACE JTF-S
Item no. 00166671-xx SIPLACE JTF-M
6
6.6.1 Description
The SIPLACE JTF-S/JTF-M is an automatic and fast changer for standard JEDEC waffle pack
trays. On SIPLACE X-Series S machines, a JTF-S/JTF-M tray feeder can be installed on a fixed
table instead of a component trolley. The SIPLACE JTF-S/JTF-M occupies a fixed area of tracks
on the fixed table. Linear feeders, Glue Feeders or LDU-X can be used on the free tracks.
The SIPLACE JTF-S/JTF-M is available in two versions
– SIPLACE JTF-S
The SIPLACE JTF-S stores a stack of up to 30 thin or 20 thick JEDEC waffle pack trays and
supplies them in succession. The placement machine can be supplied with one component
type at constant changeover time. 6
– SIPLACE JTF-M
Depending on the magazine type, the SIPLACE JTF-M stores up to 18 thin or 14 thick JEDEC
waffle pack trays in an exchangeable cassette and supplies them as required. The placement
machine can therefore be supplied with different component types at variable changeover
times. 6
6
PLEASE NOTE
Available from software version SC.707.1
PLEASE NOTE
For a detailed description, refer to the
"User Manual JTF-S/JTF-M", German+English [Item No. 00197446-xx]