CMV12000_DS000603_6-00.pdf - 第85页
Document Feedback CMV12000 Legal Information Datasheet • PUBLIC DS000603 • v6 - 00 • 2023 -Sep- 22 84 │ 84 14 Legal Information Copyright & disclaimer Copyright ams-OSRAM AG, Tobel bader Strasse 30, 8141 Premstaetten…
Document Feedback
CMV12000
Soldering & Storage Information
Datasheet • PUBLIC
DS000603 • v6-00 • 2023-Sep-22
84 │ 82
Figure 103:
Solder Reflow Profile Graph
12.2 Storage
Image sensors should be stored under the following conditions:
● Dust free
● Temperature between 20 °C and 40 °C
● Humidity between 30% and 60% RH
● Avoid radiation, electromagnetic fields, ESD and mechanical stress
Document Feedback
CMV12000
Revision Information
Datasheet • PUBLIC
DS000603 • v6-00 • 2023-Sep-22
84 │ 83
13 Revision Information
Document Status
Product Status
Definition
Product Preview
Pre-Development
Information in this datasheet is based on product ideas in the planning phase
of development. All specifications are design goals without any warranty and
are subject to change without notice
Preliminary Datasheet
Pre-Production
Information in this datasheet is based on products in the design, validation or
qualification phase of development. The performance and parameters shown
in this document are preliminary without any warranty and are subject to
change without notice
Datasheet
Production
Information in this datasheet is based on products in ramp-up to full production
or full production which conform to specifications in accordance with the terms
of ams-OSRAM AG standard warranty as given in the General Terms of Trade
Other definitions
Draft / Preliminary:
The draft / preliminary status of a document indicates that the content is still under internal review and subject to change without
notice. ams-OSRAM AG does not give any warranties as to the accuracy or completeness of information included in a draft /
preliminary version of a document and shall have no liability for the consequences of use of such information.
Short datasheet:
A short datasheet is intended for quick reference only, it is an extract from a full datasheet with the same product number(s) and
title. For detailed and full information always see the relevant full datasheet. In case of any inconsistency or conflict with the
short datasheet, the full datasheet shall prevail.
Changes from previous version to current revision v6-00
Page
Updated total frame time
39
● Page and figure numbers for the previous version may differ from page and figure numbers in the current revision.
● Correction of typographical errors is not explicitly mentioned.
Document Feedback
CMV12000
Legal Information
Datasheet • PUBLIC
DS000603 • v6-00 • 2023-Sep-22
84 │ 84
14 Legal Information
Copyright & disclaimer
Copyright ams-OSRAM AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights
reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written
consent of the copyright owner.
Devices sold by ams-OSRAM AG are covered by the warranty and patent indemnification provisions appearing in its General
Terms of Trade. ams-OSRAM AG makes no warranty, express, statutory, implied, or by description regarding the information
set forth herein. ams-OSRAM AG reserves the right to change specifications and prices at any time and without notice.
Therefore, prior to designing this product into a system, it is necessary to check with ams-OSRAM AG for current information.
This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual
environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are
specifically not recommended without additional processing by ams-OSRAM AG for each application. This product is provided
by ams-OSRAM AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of
merchantability and fitness for a particular purpose are disclaimed.
ams-OSRAM AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury,
property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages,
of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or
liability to recipient or any third party shall arise or flow out of ams-OSRAM AG rendering of technical or other services.
Product and functional safety devices/applications or medical devices/applications:
ams-OSRAM AG components are not developed, constructed or tested for the application as safety relevant component or for
the application in medical devices. ams-OSRAM AG products are not qualified at module and system level for such application.
In case buyer – or customer supplied by buyer – considers using ams-OSRAM AG components in product safety
devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of
ams-OSRAM AG immediately and ams-OSRAM AG and buyer and /or customer will analyze and coordinate the customer-
specific request between ams-OSRAM AG and buyer and/or customer.
ams OSRAM semiconductor RoHS compliance statement
RoHS compliant: The term RoHS compliant means that ams-OSRAM AG semiconductor products fully comply with current
RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories plus additional 4
substance categories (per amendment EU 2015/863), including the requirement that lead not exceed 0.1% by weight in
homogeneous materials.
Important information: The information provided in this statement represents ams-OSRAM AG knowledge and belief as of the
date that it is provided. ams-OSRAM AG bases its knowledge and belief on information provided by third parties, and makes no
representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third
parties. ams-OSRAM AG has taken and continues to take reasonable steps to provide representative and accurate information
but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams-OSRAM AG
and ams-OSRAM AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
Headquarters
ams-OSRAM AG
Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe
Tel: +43 (0) 3136 500 0
Please visit our website at ams-osram.com
For information about our products go to Products
For technical support use our Technical Support Form
For feedback about this document use Document Feedback
For sales offices and branches go to Sales Offices / Branches
For distributors and sales representatives go to Channel Partners