M3plus_OperationManual_e.pdf - 第12页
v 1. Safety Possible injuries from touching internal parts WA R N ING Gears and cutters can cause severe personal injury . Tu r n p o wer o ff before servicing or cleaning. 23001-5E-2M w WARNING DO NOT PUT YOUR HANDS INT…
iv
1. Safety
1.3 Warning labels
The following warning labels are affixed to the machines. Check the information on the
label and always follow its instructions. This section explains warning labels affixed to
surface mounters and all other related machines including dispensers, solder paste print-
ers and peripheral equipment.
w
WARNING
WARNING
CLOSE COVER WHILE OPERATING
Possible injury
Safety cover
23001-5E-2A
w
WARNING
KEEP THE SAFETY COVER CLOSED DURING MACHINE OPERATION. INJURIES MIGHT OCCUR
FROM TOUCHING MOVING PARTS DURING OPERATION WHILE THE SAFETY COVER IS STILL
OPEN.
WARNING
DO NOT TOUCH THIS SWITCH
MOVING MACHINE MAY CAUSE INJURY
Possible injury
Safety cover switch
23001-5E-2B
w
WARNING
DO NOT TOUCH THE SAFETY COVER SWITCH DURING MACHINE OPERATION. INJURIES
MIGHT OCCUR FROM TOUCHING MOVING PARTS DURING OPERATION WITH THE SAFETY
COVER SWITCH DEACTIVATED.
WARNING
Do not put In
hand through
openIng.
MovIng parts can
pInch hand.
Possible injuries from getting caught between moving parts
23001-5E-2J
w
WARNING
NEVER PLACE HANDS IN THE MACHINE DURING OPERATION. HAND OR FINGERS MIGHT BE
CAUGHT BETWEEN MOVING PARTS AND COVERS, CAUSING SERIOUS INJURIES.
v
1. Safety
Possible injuries from touching internal parts
WARNING
Gears and cutters can
cause severe personal injury.
Tu r n p ower off before
servicing or cleaning.
23001-5E-2M
w
WARNING
DO NOT PUT YOUR HANDS INTO THE MACHINE WHILE THE POWER IS TURNED ON. HAND OR
FINGERS MIGHT BE CAUGHT IN GEARS OR CUT BY CUTTER BLADES, CAUSING INJURIES.
c
CAUTION
HIGH VOLTAGE!
Electrical shock hazard
23001-5E-2C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the
power supply section inside the panel.
HOT!
Possible burns if touched
23001-5E-2D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
vi
1. Safety
Possible loss of eyesight
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
23001-5E-2E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
DON'T
TOUCH
Do not touch camera unit.
DO NOT TOUCH
23001-5E-2F
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component
mounting operation.
Make correct connections.
23001-5E-2K
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always
make correct connections by complying with the specified wiring methods.