M3plus_OperationManual_e.pdf - 第32页

Table of Contents 1. Before operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 1.1 Canceling emergenc y stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 1.2 Clearing an erro…

Part names and functions

1-10

6. Axis configuration

The machine axis configuration and operation are shown in the drawing and table below.

MMM Head

X axis

Y axis

W axis

Z1 to Z4 axis

R axis

Plus

Minus

Front of the machine

Axis configuration and plus/minus directions

23119-5E-20

Z1 to Z4

Axis Function

Function of each axis

Moves the conveyor (W-axis) in the X-axis direction.

Moves the head in the direction perpendicular to the PCB transfer direction on the conveyor.

Controls the height of the head assembly each head.

Rotates the nozzle shafts of the head assembly.

Adjusts the conveyor width.

Remarks

25108-5E-20

Table of Contents

1. Before operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

1.1 Canceling emergency stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

1.2 Clearing an error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2. Operation monitor and buttons . . . . . . . . . . . . . . . . . . . . 2-3

2.1 Basic configuration of operation screen . . . . . . . . . . . . . . . . . . . 2-3

2.2 Various buttons and parameter input boxes . . . . . . . . . . . . . . . . 2-4

3. Starting and stopping the machine. . . . . . . . . . . . . . . . . 2-7

3.1 Inspection before operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

3.2 Starting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

3.3 Starting and warming up the machine . . . . . . . . . . . . . . . . . . . . 2-11

3.4 Changing the conveyor unit setup . . . . . . . . . . . . . . . . . . . . . . . 2-13

3.4.1 Conveyor width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

3.4.2 Push-up pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

4. Starting and finishing production . . . . . . . . . . . . . . . . . 2-16

4.1 Starting production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

4.2 Finishing PCB production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

Chapter 2 Basic operation