M3plus_OperationManual_e.pdf - 第13页
vi 1. Safety Possible loss of eyesight LASER BEAM Do not stare into laser beam! Max. output:1 mW, Pulse width: 1ms max. Semiconductor laser (wavelength: 685nm) Class 2 laser product LASER BEAM EXIT 23001-5E-2E c CAUTION …
v
1. Safety
Possible injuries from touching internal parts
WARNING
Gears and cutters can
cause severe personal injury.
Tu r n p ower off before
servicing or cleaning.
23001-5E-2M
w
WARNING
DO NOT PUT YOUR HANDS INTO THE MACHINE WHILE THE POWER IS TURNED ON. HAND OR
FINGERS MIGHT BE CAUGHT IN GEARS OR CUT BY CUTTER BLADES, CAUSING INJURIES.
c
CAUTION
HIGH VOLTAGE!
Electrical shock hazard
23001-5E-2C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the
power supply section inside the panel.
HOT!
Possible burns if touched
23001-5E-2D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
vi
1. Safety
Possible loss of eyesight
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
23001-5E-2E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
DON'T
TOUCH
Do not touch camera unit.
DO NOT TOUCH
23001-5E-2F
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component
mounting operation.
Make correct connections.
23001-5E-2K
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always
make correct connections by complying with the specified wiring methods.
vii
1. Safety
Do not use any solvent other than specified.
23001-5E-2L
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.