M3plus_OperationManual_e.pdf - 第202页
6 - 7 6 Managing the data 3. Creating XML library 3 Enter the path to the library. Set the path to the library as follows. : \\(PC name)\YGOS\COMMON\Ma y Library\Parts : \\(PC name)\(shared f older name)\May Library\P ar…
6
Managing the data
6-6
3. Creating XML library
This section describes the features of XML data and some cautions for handling XML data. Major
differences between XML PCB data and VIOS PCB data are that XML data can be utilized as a library
and also uses the only one file format. This allows collective management and operation of PCB data
without limitation on the number of data items, and also permits registration of differences between
machines.
3.1 Setting the library path
The following is an example for setting the library in the machine or on a PC connected
on a LAN.
1
Open the "Setting" window.
Press the [Software Setting] button on the Setup window to open the "Setting"
window.
2
Press the [Library] button to open the library.
Opening the library
27600-5E-20
6 -7
6
Managing the data
3. Creating XML library
3
Enter the path to the library.
Set the path to the library as follows.
: \\(PC name)\YGOS\COMMON\May Library\Parts
: \\(PC name)\(shared folder name)\May Library\Parts
: D\Machine\(machine name)\May Library\Parts
Off-line software
PC on LAN
Machine
Path setting
: \\(PC name)\YGOS\COMMON\May Library\Mark
: \\(PC name)\(shared folder name)\May Library\Mark
: D\Machine\(machine name)\May Library\Mark
Off-line software
PC on LAN
Machine
27601-5E-20
n
NOTE
Two types of path "Local Path" and "Server Path" can be set.
Normally, the "Local Path" becomes valid when the library is selected. But, set the same path for both "Local
Path" and "Server Path" to avoid misoperation.
4
Use the [Browse] button as needed to set the path.
Pressing the [Browse] button opens the Browse Folder dialog box as shown above.
You can set the path without directly typing in the Local or Server box. After setting
the path, press the [OK] button.
6 -8
6
Managing the data
3. Creating XML library
3.2 Setting the PCB data links
This section explains how to establish links with the "Parts" and "Mark" libraries. There
are two ways of setting links from the VGOS or from the Editor.
3.2.1 Setting links from the VGOS
1
Line up the cursor with the mark or component data to be linked.
On the Mark or Parts screen, line up the cursor with the data to be linked. The mark
name or component name should be input beforehand.
2
Open the Mark or Parts Basic Information dialog box.
Select "Library Name" on the [Basic] tab and press the [Edit] button.
A dialog box appears for link setting.
3
Press the [Select] button to select a library file.
A list of mark or parts library file names appears. Select the applicable file name and
press the [OK] button.
Manual link setting
VGOS side
27602-5E-20