00197199-04_IM_WLAN-Infrastructure.pdf - 第54页
Components Motorola MC70 PDA 3.5.2 Configuration 54 Installation Manual WLAN Infrastructure for SIPLACE 3.5.2.3 3 . 5 . 2 . 3 W ir e le s s D ia g n o s t ic s Wireless Diagnostics Sending Ping Test Packages ► Click on t…
Components
3.5.2 Configuration Motorola MC70 PDA
Installation Manual WLAN Infrastructure for SIPLACE 53
► This shows the current WLAN connection profile for the MC70.
► Select OK to return to the Wireless Status menu.
► To view the current status of your IP-based network connection, select IPv4 Status. Since a static IP
address has been set, you should not experience any connection problems here.
► Select OK to return to the Wireless Status menu.
► To check the connection in detail, select Wireless Log. Select OK to return to the Wireless Status
menu.
► Close the Wireless Status menu with OK.
Components
Motorola MC70 PDA 3.5.2 Configuration
54 Installation Manual WLAN Infrastructure for SIPLACE
3.5.2.3
3.5.2.3 Wireless Diagnostics
Wireless Diagnostics
Sending Ping Test Packages
► Click on the card icon in the bottom right taskbar and select the entry Wireless Diagnostics.
► To test the connection to the Setup Center Computer, click on the ICMP Ping tab and send test pack
-
ages to the relevant IP address of the USB LAN adapter.
► Select ICMP Ping to continue.
► Enter a valid IP address (same subnet), which you want to reach, and select Start Test..
Components
3.5.2 Configuration Motorola MC70 PDA
Installation Manual WLAN Infrastructure for SIPLACE 55
► You will see the number of packages sent and acknowledged, plus the errors which occurred during
transmission. A diagram will display the transmission rate, which indicates the quality of the connec
-
tion. You can also view the signal strength (Signal Level).
► Select Stop Test to stop sending the test packages.
► Select Ok to return to the Wireless Diagnostics menu.
► Close the Wireless Diagnostics menu with Ok.
► Setup of the PDA is now complete. After switching on, the client uses the stored WLAN profile to
automatically log into the next available radio cell with the same name. The static IP address allows
the client to immediately establish an IP-based network connection to any of the network partici
-
pants, including the line server.