00197199-04_IM_WLAN-Infrastructure.pdf - 第8页

SIPLACE WLAN Concepts Legacy Concept 8 Installation Manual WLAN Infrastructure for SIPLACE 2.2 2 . 2 L e g a c y C o n c e p t Legacy Concept A single access point i s used. The acce ss point has no wire d co nnection to…

100%1 / 78
SIPLACE WLAN Concepts
Standard Concept
Installation Manual WLAN Infrastructure for SIPLACE 7
2
2 SIPLACE WLAN Concepts
SIPLACE WLAN Concepts
The following chapters describe the different concepts for connection of a placement line to the WLAN
infrastructure.
2.1
2.1 Standard Concept
Standard Concept
A single access point is used. The access point is connected to the building's network.
SIPLACE WLAN Concepts
Legacy Concept
8 Installation Manual WLAN Infrastructure for SIPLACE
2.2
2.2 Legacy Concept
Legacy Concept
A single access point is used. The access point has no wired connection to any network. The line control
PC’s and the Setup Center PC of the pre set-up area are linked via a Client Module SCALANCE W744-
1Pro. This requires realization of a further network connection (RJ45 10/100Mbps) via USB and the cor
-
responding adapter.
Components
3.1.1 Features Motorola AP6521 Access Point
Installation Manual WLAN Infrastructure for SIPLACE 9
3
3 Components
Components
3.1
3.1 Motorola AP6521 Access Point
Motorola AP6521 Access Point
Information
The AP6521 and AP6522 access points can use use WiNG software as its onboard operating system.
The AP6522 is the successor of AP652. The unique WiNG software enables the access point to function
as a Standalone “thick” access point, or a Virtual Controller AP capable of adopting and managing up to
24 access points of the same model.
For Installation, please refer to the WiNG 5.8 ACCESS POINT SYSTEM REFERENCE GUIDE
https://atgsupportcentral.motorolasolutions.com/content/emb/docs/manuals/MN002229A01.pdf
3.1.1
3.1.1 Features
Features
▪ Operating temperature range: 0 to 40°C
▪ Power over Ethernet (PoE in accordance with 802.3af)
▪ WEP encryption
▪ 802.11b/g – up to 54 Mbit/s in 2.4GHz band
▪ 802.11a – up to 54 Mbit/s in 5GHz band
▪ 802.11n - MCS 0-15 up to 300Mbps
An AP-6521 Series access point has one RJ-45 connector supporting an 10/100/1000 Ethernet port con
-
nection and requires 802.3af compliant power from an external source.
The access point contains runtime firmware which enables the unit to boot after either a power up or a
watchdog reset. The runtime firmware on the access point can be updated via the Ethernet interface.