00197199-04_IM_WLAN-Infrastructure.pdf - 第56页

Components Motorola MC70 PDA 3.5.2 Configuration 56 Installation Manual WLAN Infrastructure for SIPLACE 3.5.2.4 3 . 5 . 2 . 4 S w it c h in g O f f t h e S t a n d b y M o d e ( O p t io n a l) Switching Off the Standby …

Components

3.5.2 Configuration Motorola MC70 PDA

Installation Manual WLAN Infrastructure for SIPLACE 55

► You will see the number of packages sent and acknowledged, plus the errors which occurred during

transmission. A diagram will display the transmission rate, which indicates the quality of the connec

tion. You can also view the signal strength (Signal Level).

► Select Stop Test to stop sending the test packages.

► Select Ok to return to the Wireless Diagnostics menu.

► Close the Wireless Diagnostics menu with Ok.

► Setup of the PDA is now complete. After switching on, the client uses the stored WLAN profile to

automatically log into the next available radio cell with the same name. The static IP address allows

the client to immediately establish an IP-based network connection to any of the network partici

pants, including the line server.

Components

Motorola MC70 PDA 3.5.2 Configuration

56 Installation Manual WLAN Infrastructure for SIPLACE

3.5.2.4

3.5.2.4 Switching Off the Standby Mode (Optional)

Switching Off the Standby Mode (Optional)

Due to the hardware design of the MC70 the power of the wireless device is disconnected when the

MC70 switches to the standby mode. As a result, reestablishing the wireless connection takes 5 - 8 sec

onds after waking up from standby.

To work around this behavior, we recommend to disable the standby mode, proceed as follows.

► Select the Settings entry from the Start menu.

► Select the System tab page and select the Power icon.

► Select the Advanced tab page and disable all features in this screen.

► Click on OK to save the settings.

⇨ The power settings dialog will be closed.

Components

3.5.2 Configuration Motorola MC70 PDA

Installation Manual WLAN Infrastructure for SIPLACE 57

► Select the Backlight icon in the System tab page.

► Enable all features in the Battery Power tab page.

► Set the time value to 1 minute.

► Click on OK to save the settings. The Backlight settings dialog will be closed.

► Close the Settings dialog.

NOTICE

Battery Power

To save battery power we recommend to place the PDA in the cradle if it is not used