YSM20R_YSM20WR_Mainte_E.pdf - 第3页

i Safety instructions CE marking This equipment conforms to the EU Machiner y Directive 2006/42/EC (description A1 below) and EMC Directive 2014/30/EU (description A2 below). However , this equipment does not bear CE mar…

Be sure to read these safety instructions before using YAMAHA surface mounters or related products.

Safety instructions

SFSMT-EN-181-0100

Safety instructions

Contents

CE marking i

1. Warning labels ii

1.1 Warning label format and mark description ii

1.1.1 Warning label format ii

1.1.2 Mark description iii

2. Label positions iv

3. Safety xiv

3.1 To ensure safety xiv

3.1.1 Defining safety xiv

3.1.2 Causes of injuries and accidents xiv

3.2 Using safety gear xiv

3.3 Restrictions on machine use xv

3.3.1 Defining the operator and service personnel xv

3.3.2 Restricting machine operation with passwords xv

3.3.3 Lock out the main switch and the air supply/exhaust switch xv

3.4 Cautions during machine operation xvi

3.5 Cautions during power outages xvi

3.6 Cautions regarding ferromagnetic fields xvi

3.7 Handling the internal tape cutter xvi

3.8 Keeping hands away from moving parts xvii

3.9 Handling solvents (including solder, adhesive and flux) xix

3.10 Handling the laser xix

3.11 Handling grease and oil xx

3.12 Handling batteries xx

3.13 Handling heavy objects xx

4. Safety message in this manual xxi

Safety instructions

CE marking

This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC

Directive 2014/30/EU (description A2 below).

However, this equipment does not bear CE marking if a custom order item was installed.

A1.

Cautions regarding the official language of EU countries and the language used in operation

manuals, CE declarations, operation screen characters, and warning labels when this equipment is

installed in an EU country.

• All materials except warning labels are written in English only.

NOTE

Warning labels only have pictograms or else include warning messages in English, Chinese, Korean and Japanese

language.

A2.

EMC description

• Electromagnetic immunity (Immunity)

Complies with test standards as specified by EN 61000-6-2.

• Electromagnetic emissions (Emission)

Complies with test standards for ISM category: Group 1, Class A, as specified by EN 55011.

NOTE

Class A equipment is intended for use in industrial environments. If used in other environments, ensuring

electromagnetic compatibility (EMC) might be difﬁcult. Refer to EN 55011 standards for detailed information.

Safety instructions

1. Warning labels

To use the YAMAHA machines safely and correctly, warning labels are attached to the machine body and

peripheral equipment. Check that the information on each warning label is clearly legible and comply with

the instructions.

1.1 Warning label format and mark description

1.1.1 Warning label format

As shown below, a warning label indicates the degree of hazard by means of a signal word and the color of the

signal word panel. A mark and a pictogram are also used to emphasize the message. Basically, labels attached

to the outside of machines are in 4 languages (English, Chinese, Korean and Japanese) while labels attached to

the inside of the machines are only a pictogram.

Pinch or crush hazard.

WARNING

90K41-000380

Warning label format

Warning message and mark (pictogram) example

Signal word

Safety alert symbol

Signal word panel

Message

Mark and pictogram

Danger : Red

Warning : Orange

Caution : Yellow

93001-YSM-00