YSM20R_YSM20WR_Mainte_E.pdf - 第69页

3-8 3 Periodic maintenance items n How to use ANC nozzle attaching/detaching tool (detaching nozzles) 1 Open the nozzle station shutter . Open the [Unit] - [Head] screen and press the [Nozzle. Stn Shutter] button to open…

100%1 / 207
3-7
3
Periodic maintenance items
1.2.4 ANC nozzle attaching / detaching tool
Regarding the machine equipped with a nozzle station (option / hereafter "ANC"), nozzles are detached
manually from the nozzle station for maintenance. In this case, if using the "ANC nozzle attaching/detaching
tool" (hereafter "tool"), up to 10 nozzles can be attached/detached at once.
Nozzles are not attached Nozzles are attached (use it facing down)
ANC nozzle attaching/detaching tool
Tool tip protecting cap
ANC nozzle attaching/detaching tool
30x, 31x series nozzles
53310-KMK-00
n
Available nozzles
30x series nozzles (301A, 303A nozzles, etc.) and 31x series nozzles (311A, 312A nozzles, etc.)
n
NOTE
The "Tool tip protecting cap" is attached on the tip of the tool when shipping the tool. Make sure to attach the cap
except when the tool is used for protection.
3-8
3
Periodic maintenance items
n
How to use ANC nozzle attaching/detaching tool (detaching nozzles)
1
Open the nozzle station shutter.
Open the [Unit] - [Head] screen and press
the [Nozzle. Stn Shutter] button to open the
nozzle station shutter.
2
Set the tool on the nozzle station.
1. Press the emergency stop button and
then open the machine safety cover.
2. Set the tool vertically on the nozzles at
the nozzle station aligning the position of
nozzles to be detached.
3. Check that the tool is set to nozzles
securely.
3
Raise the tool up.
Raise the tool up vertically and slowly.
n
NOTE
Raise the tool up vertically and slowly to avoid the
nozzle tip from hitting the shutter, etc.
c
CAUTION
If raising the tool up fast and forcibly, nozzles or the
nozzle station may be damaged.
4
Close the nozzle station shutter.
Press the [Nozzle. Stn Shutter] button again
and close the nozzle station shutter.
Nozzle station - Opening the shutter
Step1
54300-KMK-00
Setting the tool
Step 2
Set the tool vertically aligning
nozzles to be detached.
Check that the tool is set to
nozzles securely.
53311-KMK-00
Raising the tool up
Step 3
Raise the tool up vertically to avoid the
nozzle tip from hitting the shutter.
53312-KMK-00
3-9
3
Periodic maintenance items
n
How to use ANC nozzle attaching/detaching tool (storing)
Attach nozzles at the nozzle station in the reverse order of detaching.
1
Check the nozzle setting position.
Check that other nozzles are not set to the nozzle storage position and the setting position is correct.
n
NOTE
Regarding the nozzle setting position, check the nozzle placement position label attached in the machine or the
machine setting.
2
Set the nozzles to the tool.
c
CAUTION
The positioning pins are in each nozzle storage position at the nozzle station to avoid setting the incorrect types of
nozzle and the incorrect nozzle setting direction. Take precautions about the nozzle setting position and the nozzle
setting direction when setting the nozzles to the tool.
3
Open the nozzle station shutter.
1. Press the emergency stop button and then open the machine safety cover.
2. Open the [Unit] - [Head] screen and press the [Nozzle. Stn Shutter] button to open the nozzle station
shutter.
4
Set the tool on the nozzle station.
1. Set the tool that the nozzles were set in Step 2 to the relevant position of the nozzle station.
2. Check that the nozzles are set securely to the nozzle station.
5
Close the nozzle station shutter.
Press the [Nozzle. Stn Shutter] button again and close the nozzle station shutter.
6
Raise the tool up.
Raise the tool up vertically and slowly and detach the nozzles from the tool.
n
NOTE
Raise the tool up vertically and slowly to avoid the nozzle tip from hitting the shutter, etc.
c
CAUTION
If raising the tool up fast and forcibly, nozzles or the nozzle station may be damaged.