00197369-02_AI_PPW_2te_Reihe_X-Serie-S_de_en.pdf - 第103页

a c p a g e

Appendix

Excerpts from the Service Manual 4.1.2 Installation Positions of COT Insert and Manual Table (Table Positions)

102 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC

Setting

► Set the correct value on the jumper for your head type, software and control method.

Nozzle Changer CP20P - Jumper X10

Jumper X10

4.1.2

4.1.2 Installation Positions of COT Insert and Manual Table (Table Positions)

Installation Positions of COT Insert and Manual Table (Table Positions)

To check whether the machine has I/O module control,

proceed as follows:

► Switch over to the operator level Service.

► Select the button.

► Select the button Embedded Software.

► Select the button Update Subsystem.

► If I/O module control is present, you will see the entry

Nozzle Changer at I/O Module.

Head Jumper position

SW <= 706.x SW >= 707.x

I/O controller XFCU I/O controller XFCU

CPx, DLM 1-2 1-2 1-2 2-3

C&P20 P --- --- --- 2-3 (factory set-

tings)

The following installation positions apply to the X series

1. Installation position 1

COT insert: X4i S

2. Installation position 2

COT insert, manual table: X4i S

3. Installation position 3

COT insert, manual table: X2 S, X3 S, X4 S

acpage

Item no.: 00197369-02 ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany