00197369-02_AI_PPW_2te_Reihe_X-Serie-S_de_en.pdf - 第70页

Installation X4i S - Installing the NC Row 2 3.1.1 Prepar atory Steps 70 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te R eihe - PPW vor MTC 2/WPC Moving the COT insert Fastening s crews (1) a n d (2) : Fastening screws on …

100%1 / 104
Installation
3.1.1 Preparatory Steps X4i S - Installing the NC Row 2
NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC 69
3.1.1.4
3.1.1.4 Moving the COT Insert to the Second Table Position
Moving the COT Insert to the Second Table Position
Removing the side cover
Location 4 on the X4i S – at first table position
(1) to (4): Fastening screw positions of the COT insert
To gain access to the screw at (3), you need to remove
the outer side cover.
See also"4.1.2 Installation Positions of COT Insert and
Manual Table (Table Positions)" [ ➙ 102]
Location 4 on X4i S – inner side cover
(1) to (4): Positions of fastening screws
► Remove the screws at (1) to (4).
Location 4 on X4i S – outer side cover
(1) to (4): Positions of fastening screws
► Remove the screw at (1).
► Loosen the screws at (2) to (4).
► Remove the side cover.
Installation
X4i S - Installing the NC Row 2 3.1.1 Preparatory Steps
70 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC
Moving the COT insert
Fastening screws
(1) and (2): Fastening screws on the left of the COT insert
► Remove the two fastening screws on both the left and
the right of the COT insert using an Allen key or a T-
handle.
Fixture point on machine frame
► Remove the cable ties at (1).
Installation
3.1.2 Removing the NC Row 1 X4i S - Installing the NC Row 2
NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC 71
Installing the side cover
► Reinstall the side cover.
3.1.2
3.1.2 Removing the NC Row 1
Removing the NC Row 1
Before you can fit the support and mount for nozzle row 2 and connect the nozzle changer, you need to
remove the nozzle changer in row 1.
► Unplug the connection cable and the compressed air line and then place the nozzle changer to one
side.
COT insert at second table position
► Pull the COT insert approx. 100 mm forwards to the
second table position.
► Use the four screws (1) to (4) to fasten the COT insert
to its new position.
See also"4.1.2 Installation Positions of COT Insert and
Manual Table (Table Positions)" [ ➙ 102]
Nozzle changer in row 1
► Remove the fastening screws at (1) to (4).