00197369-02_AI_PPW_2te_Reihe_X-Serie-S_de_en.pdf - 第73页

Installation 3.1.4 Location 1 and 3 – Installing the "Support Option ASP Spe ed Flex Row 2 SP1/3" X4i S - Installing the NC Row 2 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC 73 Install…

Installation

X4i S - Installing the NC Row 2 3.1.3 Preparing the Compressed Air Connection

72 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC

3.1.3

3.1.3 Preparing the Compressed Air Connection

Preparing the Compressed Air Connection

To connect the second nozzle changer, you need to branch off the line to the nozzle station.

► Use diagonal cutters to cut the supply line to the nozzle station about 5 cm behind the Y coupling.

3.1.4

3.1.4 Location 1 and 3 – Installing the "Support Option ASP Speed Flex Row 2 SP1/3"

Location 1 and 3 – Installing the "Support Option ASP Speed Flex Row 2 SP1/3"

Parts required from "Support option ASP speed flex row 2" [03090225-xx]

NC option mount

Branched line to nozzle station

1. Y coupling for supplying the nozzle station and NC 2

2. 2A: Original line to nozzle station

2B: Branched line to nozzle station

3. Line to NC 1

4. Connection for line to NC2

► Fit a Y coupling (1) to the original end of the line lead-

ing to the nozzle station (2A).

► Fit the branch end of the line leading to the nozzle

station (2B) into the corresponding connection on the

Y coupling.

► Plug the line leading to NC2 into the connection at (4)

when installing the NC2.

Quantity Designation Item number

2 NC option mount 03005337-xx

2 ISO4762 - M5 x 14-A2-70 03043120-xx

At locations 1 and 3 you need the NC option mount

[03005337-xx] with prefitted shim plates for the left and

right sides.

Installation

3.1.4 Location 1 and 3 – Installing the "Support Option ASP Speed Flex Row 2 SP1/3" X4i S - Installing the NC Row 2

NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC 73

Installation

Attaching the mount – example of right side

► Fit the mount for the second row from the left, onto

the mount for the first row.

► Press the mount down firmly so that the two align-

ment pins (1) and (2) are completely inserted into the

relevant holes on the front mount.

Screwing the mount into place – example of right side

► Screw the mount for the second row into place from

the left side (1).

Installation

X4i S - Installing the NC Row 2 3.1.4 Location 1 and 3 – Installing the "Support Option ASP Speed Flex Row 2

74 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC

► For configurations without Smart Pin Support, continue with section "3.1.8 Checking the Height"

[➙80].

► For configurations with Smart Pin Support, continue with section "3.1.7 Inserting the NC ASP Sup-

port Plate" [ ➙ 78].