00197369-02_AI_PPW_2te_Reihe_X-Serie-S_de_en.pdf - 第77页

Installation 3.1.6 Location 2 and 4 - Installing the "NC Option Mount" X4i S - Installing the NC Row 2 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC 77 Installation ► For configurations …

100%1 / 104
Installation
X4i S - Installing the NC Row 2 3.1.6 Location 2 and 4 - Installing the "NC Option Mount"
76 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC
3.1.6
3.1.6 Location 2 and 4 - Installing the "NC Option Mount"
Location 2 and 4 - Installing the "NC Option Mount"
Parts required from the upgrade kit
NC option mount
Support fixed
► Screw the support for the second row into place (1).
Quantity Designation Item number
1 NC option mount 03005337-xx
1 ISO4762 - M5 x 14-A2-70 03043120-xx
NC option mount [03005337-xx]
At locations 2 and 4 you need the NC option mount
[03005337-xx] with preassembled shim plates for the
right side.
Installation
3.1.6 Location 2 and 4 - Installing the "NC Option Mount" X4i S - Installing the NC Row 2
NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC 77
Installation
► For configurations without Smart Pin Support, continue with section "3.1.8 Checking the Height"
[➙80].
► For configurations with Smart Pin Support, continue with section "3.1.7 Inserting the NC ASP Sup-
port Plate" [ ➙ 78].
Attaching the mount
► Fit the mount for the second row, onto the mount for
the first row.
► Press the mount down firmly so that the two align-
ment pins (1) and (2) are completely inserted into the
relevant holes on the front mount.
Mount fixed into place
► Screw the mount for the second row into place (1).
Installation
X4i S - Installing the NC Row 2 3.1.7 Inserting the NC ASP Support Plate
78 NC Row 2 - NC in Front of MTC 2/WPC PPW 2te Reihe - PPW vor MTC 2/WPC
3.1.7
3.1.7 Inserting the NC ASP Support Plate
Inserting the NC ASP Support Plate
For configurations with Smart Pin Support, the H-shaped NC ASP support plate for the second row is
installed between the first row of nozzle changers and the nozzle station, if two W5 magazines are to be
used.
Parts required from "Support option ASP speed flex row 2 SP1/3" [03097749-xx]
Additional requirements:
1x Coding sheet box assembly [03084178-xx]
Installation
Quantity Designation Item number
1 NC ASP support plate for row 2 03090087-xx
4 M4x10 03023262-xx
Short support plate
► Remove the short support plate before installing the
H-shaped support plate.
► Remove the screws at (1) and (2).
H-shaped support plate
► Use the four screws to fix the support plate at (1) and
(3).
The points marked (2) and (4) are reserved for fastening
the magazines.
► Fix the magazine for the first nozzle changer row to
(2) and that for row 2 to (4).