BM料架治具使用手册.pdf - 第25页
Feeder Inspection Unit 2.4 Dimension Gauges for OHP 2.4−2 DX1OEC−12−330−A0 2.4.2 Dimension Gauges for 9−inch Monitor Dimension gauges for attaching 9−inch monitor • These dimension gauges are for attaching to the monitor…
2.4 Dimension Gauges for OHP
Feeder Inspection Unit
2.4−1
DX1OEC−12−330−A0
2.4 Dimension Gauges for OHP
DX1OEC−12−330−A0
Sentence No.
2.4.1 Overview
The dimension gauges are for attaching a transparent film indicating the tolerance range for adjustment
of the feed wheel to the monitor so as to make OK/NG judgment easily.
• The gauges described in ‘2.4.2’ show the tolerance range for adjustment of the 9−inch monitor (Option).
• When using an optional 9−inch monitor, photocopy it normally (1/1).
• If the monitor size is different, it is required to enlarge or reduce the dimension gauge according to the
monitor size.
1mm
Monitor
Dimension
gauge
Wheel outer size frame
Tolerance range in X direction
Tolerance range in Y direction
=HINT=
When using the gauge with other sized monitor, the outer width of the feed wheel will be 1 mm
(1.2 mm only for 0603 double feeder). So enlarge or reduce it according to the outer width (1 mm
on the display) of the feed wheel on the monitor.
Feeder Inspection Unit
2.4 Dimension Gauges for OHP
2.4−2
DX1OEC−12−330−A0
2.4.2 Dimension Gauges for 9−inch Monitor
Dimension gauges for attaching 9−inch monitor
• These dimension gauges are for attaching to the monitor by the type of wheel.
Use a proper dimension gauge corresponding to the feeder type or feeder width.
• Photocopy them to OHP sheets (Ex. Sumitomo 3M: PP2500) normally (1/1).
• The inner frame refers to the outer frame of the feed wheel teeth.
• The outer frame indicates the tolerance range of the feed wheel. (Serves as a guide for OK/NG judgment.)
• Enlarged size on the monitor is x 62.5.
• Attach a dimension gauge so that the reference lines of the dimension gauge may align with the graduation
lines on the monitor.
Graduation line
(X direction)
Reference line
(Y direction)
Reference
line
(X direction)
Attach
Monitor
Dimension
gauge
Wheel outer size
frame
Tolerance range in X direction
Tolerance range in Y direction
1mm
Graduation line
(Y direction)
2.4 Dimension Gauges for OHP
Feeder Inspection Unit
2.4−3
DX1OEC−12−330−A0
Pneumatic feeder for 8 mm
8mm
Pneumatic feeder