BM料架治具使用手册.pdf - 第38页

3.2 Connecting Method Feeder Inspection Unit 3.2−1 DX1OEC−1 1−080−A0 3.2 Connecting Method DX1OEC−1 1−080−A0 Sentence No. Before using the adjust unit, connect the jig, power box and monitor via cables. At this time, con…

100%1 / 100
Feeder Inspection Unit
3.1 Environmental Requirements
3.1−2
DX1OEC−11−070−B0
=REMARKS=
Before installing the unit, make sure the following dimensions are satisfied (when inspecting large
reel tape feeders).
(Operator’s standing position and the installation space for a power box are not included.)
When installing the unit on the desk for standing work,
approx. 800 mm is recommended.
150mm or more
(for work space)
100mm or more
(for work space)
200mm
or more
30−80 mm
150mm or more
(for work space)
(Space required for
attaching/detaching
feeders)
800mm or
more
3.2 Connecting Method
Feeder Inspection Unit
3.2−1
DX1OEC−11−080−A0
3.2 Connecting Method
DX1OEC−11−080−A0
Sentence No.
Before using the adjust unit, connect the jig, power box and monitor via cables.
At this time, connect the air tube to the jig as well.
=REFERENCE=
The breaker is not provided with earth leakage detection function. Therefore, be sure to ground
the power box. (If necessary, an earth leakage breaker should be provided by the customer.)
=REMARKS=
Before connecting the cables, be sure to turn OFF the main switch and breaker.
Camera
Power cable for power box
(Power supply: 100 to 240V AC)
Valve
Air tube
* To be provided
by the customer.
PNL cable
(Power box − Adjust unit)
Power box
Camera cable
(Power box − Camera)
Monitor
Rear
Monitor signal cable
(Power box − Monitor)
Monitor power cable (Option)
(Power box − Monitor)
* Provided with the optional monitor only.
Adjust unit
Feeder Inspection Unit
3.2 Connecting Method
3.2−2
DX1OEC−11−080−A0
Detailed Drawing of Power Box Connection
PNL cable
(Power box − Adjust unit)
• Tighten screws on both ends of
the connector.
Ground cable
• Be sure to connect the ground cable.
Power cable for
power box
Set screw
Screw
Camera cable
(Power box − Camera)
Monitor signal cable
(Power box − Monitor)
Monitor power cable
(Option)
(Power box − Monitor)
Detailed Drawing of Monitor (Option) Connection
Monitor signal cable
(Power box − Monitor)
Monitor power cable
(Option)
(Power box − Monitor)