BM料架治具使用手册.pdf - 第85页
Feeder Inspection Unit 5.3 Lubrication 5.3−2 DX1OEC−80−140−C0 5.3.2 Recommended Lubricants Sliding Parts Machine oil Grease Panasonic − *1 MP Grease *1 MP Grease − Shell T onna Oil T68 Alvania Grease 2 Alvania Grease 2 A…
5.3 Lubrication
Feeder Inspection Unit
5.3−1
DX1OEC−80−140−C0
5.3 Lubrication
DX1OEC−80−140−C0
Sentence No.
5.3.1 Guide to Lubrication Table
Configuration diagram: Presents the detailed view tape feeder in a parts list format.
Parts caulked to make a single cast are also shown.
Oiling point: Lists the parts requiring lubrication indicated in the configuration drawing, with
necessary information such as oil type, oil volume and period of oiling.
Description: Illustrates the details of parts requiring lubrication.
=REMARKS=
Do not disassemble the feeder adjust unit for oiling because each part of it has been adjusted.
Be sure to observe the instructions when replacing the unit.
Detailed explanation
Oiling point
Feeder Inspection Unit Feeder Inspection Unit
Feeder Inspection Unit
5.3 Lubrication
5.3−2
DX1OEC−80−140−C0
5.3.2 Recommended Lubricants
Sliding Parts
Machine oil Grease
Panasonic
−
*1
MP Grease
*1
MP Grease
−
Shell Tonna Oil T68 Alvania Grease 2 Alvania Grease 2
Alvania EP
Grease R0
Mobil Vactra No.2 Mobilux 2 Mobilux 2 Mobilux EP0
Esso Febis K68
Beacon 2
or
Lithtan 2
Beacon 2
or
Lithtan 2
Pen−O−Led
EP grease
or
Lithtan EP0
Kyodo Yushi − Multemp LRL Multemp LRL −
Application
Examples
Sliding parts Ball screw Chain
*1 The grease is sold through spare parts route.
Parts No.: 1kg can N990PANA−023
100g tube N990PANA−022
80g bellows 5 pcs N990PANA−027
• Use ISO #68 or equivalent for machine oil.
Antirust Lubrication
Name Spare Parts Number Sales Route
Touch Lube N990PANA−028 Panasonic Factory Solutions Co., Ltd.
5.3 Lubrication
Feeder Inspection Unit
5.3−3
DX1OEC−80−140−C0
5.3.3 XYZ Stage
3
4
2
1
4
4
Oiling
No. Oiling point Oil type
Oil
volume
Period Lubrication method
1 Feed screw (X) MP grease
Moderate
amount
3 months
Apply grease entirely to the thread
and wipe off any excess.
2 Feed screw (Y) MP grease
Moderate
amount
3 months
Apply grease entirely to the thread
and wipe off any excess.
3 Feed screw (Z) MP grease
Moderate
amount
3 months
Apply grease entirely to the thread
and wipe off any excess.
4 Bearing MP grease
Moderate
amount
Once a
year
Fill grease appropriately from the
open side and wipe off any excess.
=HINT=
1−4: It is not necessary to disassemble the unit for lubrication.