BM料架治具使用手册.pdf - 第39页

Feeder Inspection Unit 3.2 Connecting Method 3.2−2 DX1OEC−1 1−080−A0 Detailed Drawing of Power Box Connection PNL cable (Power box − Adjust unit) • T ighten screws on both ends of the connector . Ground cable • Be sure t…

100%1 / 100
3.2 Connecting Method
Feeder Inspection Unit
3.2−1
DX1OEC−11−080−A0
3.2 Connecting Method
DX1OEC−11−080−A0
Sentence No.
Before using the adjust unit, connect the jig, power box and monitor via cables.
At this time, connect the air tube to the jig as well.
=REFERENCE=
The breaker is not provided with earth leakage detection function. Therefore, be sure to ground
the power box. (If necessary, an earth leakage breaker should be provided by the customer.)
=REMARKS=
Before connecting the cables, be sure to turn OFF the main switch and breaker.
Camera
Power cable for power box
(Power supply: 100 to 240V AC)
Valve
Air tube
* To be provided
by the customer.
PNL cable
(Power box − Adjust unit)
Power box
Camera cable
(Power box − Camera)
Monitor
Rear
Monitor signal cable
(Power box − Monitor)
Monitor power cable (Option)
(Power box − Monitor)
* Provided with the optional monitor only.
Adjust unit
Feeder Inspection Unit
3.2 Connecting Method
3.2−2
DX1OEC−11−080−A0
Detailed Drawing of Power Box Connection
PNL cable
(Power box − Adjust unit)
• Tighten screws on both ends of
the connector.
Ground cable
• Be sure to connect the ground cable.
Power cable for
power box
Set screw
Screw
Camera cable
(Power box − Camera)
Monitor signal cable
(Power box − Monitor)
Monitor power cable
(Option)
(Power box − Monitor)
Detailed Drawing of Monitor (Option) Connection
Monitor signal cable
(Power box − Monitor)
Monitor power cable
(Option)
(Power box − Monitor)
3.2 Connecting Method
Feeder Inspection Unit
3.2−3
DX1OEC−11−080−A0
Detailed Drawing of Air Connection
Camera
(1)
Insert the air tube while
pushing upward.
(2)
After connecting the
air tube, secure it
with a clip.
Valve
Air tube (φ6)
Screw
Clip
Valve
Air tube (φ6)