BM料架治具使用手册.pdf - 第4页
Feeder Inspection Unit 1 DX1OEC−02−010−A0 DX1OEC−02−010−A0 Sentence No. T able of Contents 1. SAFETY 1.0−2 ....................................... 1.1 Positions of W arning Labels 1.1−1 ..................................…
Thank you for purchasing the Tape Feeder Inspection Unit.
This manual contains such explanations as operations, detailed
functions, routine maintenance and inspection, etc.
Before using the product, read this manual carefully for optimum
performance. Retain this manual for future reference.
Feeder Inspection Unit
1
DX1OEC−02−010−A0
DX1OEC−02−010−A0
Sentence No.
Table of Contents
1. SAFETY 1.0−2.......................................
1.1 Positions of Warning Labels 1.1−1...................................
1.2 Safety Standards 1.2−1............................................
2. GENERAL DESCRIPTION 2.0−2.......................
2.1 Overview 2.1−1...................................................
2.1.1 Features 2.1−1............................................................
2.1.2 Specifications 2.1−1........................................................
2.1.3 Available Check Items 2.1−1................................................
2.2 Configuration 2.2−1...............................................
2.3 Gauge Jig Specifications 2.3−1.....................................
2.4 Dimension Gauges for OHP 2.4−1...................................
2.4.1 Overview 2.4−1............................................................
2.4.2 Dimension Gauges for 9−inch Monitor 2.4−2...................................
3. INSTALLATION 3.0−2.................................
3.1 Environmental Requirements 3.1−1..................................
3.2 Connecting Method 3.2−1..........................................
4. USING THE ADJUST UNIT 4.0−2......................
4.1 Adjusting Wheel Position 4.1−1.....................................
4.1.1 Inspection Procedure 4.1−1.................................................
4.1.2 Checking Component Status at the Pickup Position (Reference) 4.1−2............
4.1.3 Preparations for Inspection 4.1−3............................................
4.1.4 Removing Tape Retainer 4.1−7..............................................
4.1.5 Checking the Wheel Position in Tape Feed Direction (Y Direction) 4.1−8...........
4.1.6 Checking the Wheel Position in Tape Width Direction 4.1−14......................
4.1.7 Checking Component Status at the Pickup Position 4.1−15.......................
4.2 Tape Feeder Operation Check 4.2−1................................
4.2.1 Control Panel Layout and Function 4.2−1......................................
4.2.2 Preparations 4.2−3.........................................................
4.2.3 Pneumatic Feeder 4.2−4....................................................
4.2.4 Pneumatic Double Feeder 4.2−7.............................................
4.2.5 Motorized Feeder 4.2−9....................................................
5. INSPECTION 5.0−2..................................
5.1 Daily Check Items 5.1−1...........................................
5.1.1 Adjusting the Camera Position 5.1−2.........................................
Feeder Inspection Unit
2
DX1OEC−02−010−A0
5.2 Routine Check Item 5.2−1..........................................
5.2.1 Gauge Jig Precision Check 5.2−2............................................
5.2.2 Replacing LED in the Camera 5.2−3..........................................
5.3 Lubrication 5.3−1..................................................
5.3.1 Guide to Lubrication Table 5.3−1.............................................
5.3.2 Recommended Lubricants 5.3−2.............................................
5.3.3 XYZ Stage 5.3−3..........................................................
5.3.4 Clamp Stand 5.3−5.........................................................
6. TROUBLESHOOTING 6.0−2...........................
6.1 Troubleshooting 6.1−1.............................................
7.RECYCLING 7.0−2....................................
7.1 Synthetic Resin Parts 7.1−1........................................