AL1_SiplaceX-en.pdf - 第289页
1 - 35 S tudent Guide SIPLACE X Ausgabe 02/2005 7 Sit est 35 Axis dat a 7 Fig. 7.2 - 22 head modularity - axis data (1) Here you can overwrite the Z- and st ar axis data from the head eprom to th e machine dat a and the …
1 - 34
Student Guide SIPLACE X
7 Sitest Ausgabe 02/2005
34
7.2.17.3 Head modularity Siplace X
– Choose "Settings" from the Sitest- menu bar, afterwards "Head exchange"
Head data 7
Fig. 7.2 - 21 head modularity - head data
(1) At the head exchange the corresponding head type gets select and set here.
(2) At the head exchange the corresponding camera type of the head type gets select and set
here.
(3) Here are shown the head data of the installed head. The current BIOS and application version,
the head type and the camera type of the installed head.
1
2
3
1 - 35
Student Guide SIPLACE X
Ausgabe 02/2005 7 Sitest
35
Axis data 7
Fig. 7.2 - 22 head modularity - axis data
(1) Here you can overwrite the Z- and star axis data from the head eprom to the machine data and
the other way round.
Function 7
Fig. 7.2 - 23 head modularity - function
(1) After the head was changed, it is possible to calibrate the changed head with help of the head
exchange menu. Of course it is also possible to calibrate the other heads with this function. Basicly
you can also calibrate the new head, and already installed heads in Sitest menu "Calibrate ma-
chine..." and then "All heads and cameras..."
(2) The same is valid here, see (1). After the head exchange you can directly do a head- map-
ping.You also find the function head- mapping in Sitest menu "Calibrate machine..." and then
"Head- Mapping".
1
1
2
