AL1_SiplaceX-en.pdf - 第4页
1 - 2 S tudent Guide Course Contents Advanced Level 1 Edition 02/2005 2 Course Content s Advanced Level 1 Introduction: 0 – General Introduction – Curriculum of the co urse – Requirement s of the p articip ants SIPLACE S…
1 - 1
Student Guide Advanced 1
Edition 02/2005 Course information Advanced Level 1 Siplace X
1
Course information
Advanced Level 1 Siplace X
This documentation will lead you through the Advanced Level 1 training for SIPLACE X machine.
Course duration: 5 Days
Prerequisites
SIPLACE Operator Training (or similar knowledge)
SIPLACE Preventive Maintenance
Target Group
Line engineers
Service personnel
Course Objectives
The participant can identify the general parts of a X machine and their general function.
He can also operate the SITEST software, can perform basic adjustments and can run a complete
machine calibration.
Finally they understand the principle of the different placement heads their reference cycle and
can explain the general principle of the placement cycles.
Additionall the participant can locate and eliminate minor errors.
1 - 2
Student Guide
Course Contents Advanced Level 1 Edition 02/2005
2
Course Contents Advanced Level 1
Introduction: 0
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations: 0
– SIPLACE safety instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview: 0
– Overall View with C&P20 head, X-Feeder and Siplace Vision
– Power supply and pneumatic, cage, Axis and computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Communication units
Gantry: 0
– Mechanical structure of the X- and Y-Axes
– Adjustments on the parts of the gantry
1 - 3
Student Guide Advanced 1
Edition 02/2005 Course Contents Advanced Level 1
3
Collect & Place head 6/12: 0
– General Overview
– Demonstration and explanation of a head reference run
– Pick-up and placement cycle of the C&P head
– Removing the front part of the C&P head
– Overview front part of the head
– Dis- and reassembly of spare parts at the front part
– Remove back part of the head
– Overview back part of the head
– Spare part replacement at the head back part
– Vacuum system
– Explanation vacuum- / air blow system
– Remount C&P head
– Adjustment of the air blow at reject and placement circuit
– Adjustment of the zero point correction star axis
– Structure and operation mode of the nozzle changer
Collect & Place head 20: 0
– General Overview
– Demonstration and explanation of a head reference run
– Pick-up and placement cycle of the C&P20 head
– Structure and functional groups of the C&P20 head
– Disassembly and assembly of the C&P20 head
– Spare part replacement and adjustments at the C&P20 head
– Structure and operation mode of the nozzle changer
Twin Head: 0
– Position and environment of the Twin head
– Demonstration and explanation of a head reference run
– Pick-up and placement cycle of the C&P head
– Structure and functional groups of the Twin head
– Disassembly and assembly of the Twin head
– Spare part replacement and adjustments at the Twin head
– Structure and operation mode of the nozzle changer