AL1_SiplaceX-en.pdf - 第5页
1 - 3 S tudent Guide Advanced 1 Edition 02/2005 Course C ontents Advanced Level 1 3 Collect & Place he ad 6/12: 0 – General Overview – Demonstration and explana tion of a head reference r un – Pick-up a nd placeme nt…
1 - 2
Student Guide
Course Contents Advanced Level 1 Edition 02/2005
2
Course Contents Advanced Level 1
Introduction: 0
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations: 0
– SIPLACE safety instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview: 0
– Overall View with C&P20 head, X-Feeder and Siplace Vision
– Power supply and pneumatic, cage, Axis and computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Communication units
Gantry: 0
– Mechanical structure of the X- and Y-Axes
– Adjustments on the parts of the gantry
1 - 3
Student Guide Advanced 1
Edition 02/2005 Course Contents Advanced Level 1
3
Collect & Place head 6/12: 0
– General Overview
– Demonstration and explanation of a head reference run
– Pick-up and placement cycle of the C&P head
– Removing the front part of the C&P head
– Overview front part of the head
– Dis- and reassembly of spare parts at the front part
– Remove back part of the head
– Overview back part of the head
– Spare part replacement at the head back part
– Vacuum system
– Explanation vacuum- / air blow system
– Remount C&P head
– Adjustment of the air blow at reject and placement circuit
– Adjustment of the zero point correction star axis
– Structure and operation mode of the nozzle changer
Collect & Place head 20: 0
– General Overview
– Demonstration and explanation of a head reference run
– Pick-up and placement cycle of the C&P20 head
– Structure and functional groups of the C&P20 head
– Disassembly and assembly of the C&P20 head
– Spare part replacement and adjustments at the C&P20 head
– Structure and operation mode of the nozzle changer
Twin Head: 0
– Position and environment of the Twin head
– Demonstration and explanation of a head reference run
– Pick-up and placement cycle of the C&P head
– Structure and functional groups of the Twin head
– Disassembly and assembly of the Twin head
– Spare part replacement and adjustments at the Twin head
– Structure and operation mode of the nozzle changer
1 - 4
Student Guide
Course Contents Advanced Level 1 Edition 02/2005
4
Calibration(Sitest): 0
– Start / Terminating the SITEST
– Components of the User Interface
– User Interface Displays
– Overview of the machine calibration
– Zero Point Corrections on the C&P and P&P heads
– Carry out the Calibration with single calibration menus
– Complete Machine Calibration
– Check vacuum and adjust air kiss
Siplace Vision (PCB Fiducial): 0
– Overview digital visionsystem
– Illumination for fiducials
– Shape of fiducials
– Synthetic fiducials
– Pattern as fiducials or bad mark
– Synthetic bad mark