AL1_SiplaceX-en.pdf - 第73页

1 - 3 S tudent Guide SIPLACE X Edition 02/2005 3 Gantry 3 3G a n t r y 3.1 Overview Gantry The gantries of the Sipl ace X mach ine consist of one X- and one Y - axi s. Both axes are driven by a linear motor which is equi…

1 - 2

Student Guide SIPLACE X

Contents Edition 02/2005

1 - 3

Student Guide SIPLACE X

Edition 02/2005 3 Gantry

3Gantry

3.1 Overview Gantry

The gantries of the Siplace X machine consist of one X- and one Y - axis. Both axes are driven by

a linear motor which is equipped with an integrated temperature sensor. The Y-axis moves from

the right to the left side in positive counting direction if you look in transportation direction, the X-

axis moves from the the input conveyor to the output conveyer in positive counting direction. The

placement heads are mounted on the head plates of the respective X axis.

Fig. 3.1 - 1 Position of the gantries e.g. X3

Legend:

Note:

On the Siplace X and HF-Machines it is possible, that we use two different kind of gantries.

So we recognize the gantry type with an Eprom and load automatically the right machine

data (CFK 02 or CFK 04).

G1Gantry 1 in PA1 G3Gantry 3 in PA2

X1X-Axis, Gantry 1 X3X-Axis, Gantry 3

Y1Y-Axis, Gantry 1 Y3Y-Axis, Gantry 3

G4Gantry 4 in PA 1

X4X-Axis, Gantry 4 (T)Transportation direction

Y4Y-Axis, Gantry 4 (TS)Temperature sensor on each head mounting plate

1 - 4

Student Guide SIPLACE X

3 Gantry Edition 02/2005

Fig. 3.1 - 2 Main parts at the "Gantries" e.g. X2

Legend

(1) Secondary part X-axis (Magnet) (2) Primary part X-axis (Linear motor)

(3) Primary part Y-axis (Linear motor) (4) Secondary part Y-Axis (Magnet)

(5) Secondary part X-axis (Magnet) (6) Primary part X-axis (Linear motor)

(7) PCB camera under the X-axis (8) PCB camera mounted under the gantry