EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第110页
EUKYX 1-61 199-4100 5. Cleaning of vacuum nozzles 5 . Clea ni ng of v acu um no z zl es Peri odica l ly c lean the vacu um no z zl es to mai ntain rel iabl e and stable component p ic ks and plac em e nt . • It is advisa…
EUKYX
1-60199-4100
4.13 Fans Section
4.13 Fans Section
Ventilating Fan (2 locations)
Every 3 Months / Cleaning /
Required Time: 10 minutes
Suck dirt and dust from the dust filters with
a vacuum cleaner.
Air-Intake Fan (Side)
Ventilating Fan (Upper surface: 2 locations)
Every 3 Months / Cleaning /
Required Time: 10 minutes
Suck dirt and dust from the dust filters with
a vacuum cleaner.
Air-Intake Fan (1 location)
Ventilating Fan (1 location)
Ventilating Fan (Rear)
Ventilating Fan (Front)
Ventilating Fan (1 location)
Every 3 Months / Cleaning /
Required Time: 10 minutes
Suck dirt and dust from the dust filters with
a vacuum cleaner.
F4A45A
EUKYX
1-61199-4100
5. Cleaning of vacuum nozzles
5. Cleaning of vacuum nozzles
Periodically clean the vacuum nozzles to maintain reliable and stable component picks and
placement.
• It is advisable that the nozzles be cleaned at least once a week.
The nozzle for 0402 recommends the cleaning every 3 or 4 days.
• Change cleaning frequency according to various frequency of use and accumulation of debris
along with certain environmental conditions.
• When the vacuum suction force weakens or a nozzle constantly fails to pick or place
components, it is required to check the nozzle for debris and cleanliness.
Do not grasp this part strongly during the
nozzle cleaning.
Otherwise, the nozzle may be damaged.
When it is necessary to hold the nozzle firmly,
try to grasp the collar portion.
When a recognition error occurs frequently,
rub the back of the collar approximately
20 times with a toothbrush.
Taper part
F4A46
Note
EUKYX
1-62199-4100
5. Cleaning of vacuum nozzles
• Vacuum Nozzle Cleaning Tool List
Nozzle
Type
Section Dirtiness Type
Masking
tape
Pin
gauge
+
Insertion
Jig Drill
Air Blow
Jig +
Water
Washing
Hydraulic
Cleaning
Machine
Wiping
using a
Cloth,
etc.
Cleaning
Frequency
Spring
Nozzle
for 0201
to 0402
Nozzle Tip Attached Solder
Paste
Required Required
Appropriately
Nozzle Tip
Hole
Flux, Clogged
with Foreign
Object
Required Required Required
Nozzle
Inside Hole
Flux
Required
Once a week
Spring
Sliding
Section
Air
Contamination
Paper Fiber
Required Required
Nozzle
Outside
Required
Filter
Change
Spring
Nozzle
for 0603
to 1608
Nozzle Tip Attached Solder
Paste
Required Required
Appropriately
Nozzle Tip
Hole
Flux, Clogged
with Foreign
Object
Required Required Required
Nozzle
Inside Hole
Flux
Required
Once a week
Spring
Sliding
Section
Air
Contamination
Paper Fiber
Required Required
Nozzle
Outside
Required
Filter
Change
Rigid
Nozzle
Nozzle Tip Attached Solder
Paste
Required Required
Once a week
Nozzle Tip
Hole
Flux, Clogged
with Foreign
Object
Required Required Required
Nozzle
Inside Hole
Flux
Required
Nozzle
Outside
Required
Filter
Change