EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第226页

EUKYX 3-61 199-4100 3.4 T ray Feeder (Block1) Error ID Error Name, Description, Cause, and Remedy 4 3 8 601 T r ay (Ser vo Er ror) (B loc k1 ) Error of Power Driver , Over -current Plea se c onfir m Moto r wir ing, Exc h…

EUKYX

3-60199-4100

3.4 Tray Feeder (Block1)

Error ID Error Name, Description, Cause, and Remedy

438509 Tray (Block1)

Communication Status Error(Out of Connection number)

Please confirm AE-LINK wiring and Power wiring.

43850A Tray (Block1)

Communication Status Error(SV-VET Error)

Please confirm AE-LINK wiring and Power wiring.

43850B Tray (Block1)

Failed to read the number of Axes

Please confirm AE-LINK wiring and Power wiring.

43850C Tray (Block1)

Driver-axis is not connected.

Please confirm AE-LINK wiring and Power wiring.

43850D Tray (Block1)

Elevator1-axis is not connected.

Please confirm AE-LINK wiring and Power wiring.

43850E Tray (Block1)

Elevator2-aixs in not connected.

Please confirm AE-LINK wiring and Power wiring.

438510 Tray (Block1)

Motor Breaker Trip Error

-----

43 8 511 Tray (Block1)

Elevator Unit is not connected.

Please connect Elevator unit in Unit exchange menu.

438512 Tray (Block1)

All connectors of Elevator Unit are not connected.

Please confirm the connection to all connector of Elevator Unit

438513 Tray (Block1)

Failed to start-up Communication of SV-NET.

Please confirm AE-LINK wiring and Power wiring.

438514 Tray (Block1)

Failed to turn on Tray.(Time-out)

-----

438515 Tray (Block1)

(At finishing Auto Run) Tray operation(Block1) is not completed within a specified time.

Please push Emergency Stop button.

438516 Tray (Block1)

To discriminate the connected tray cart is failed.

Please press READY switch on Feeder Base again. Please contact to the service when to

output the error is continuous.

438517 Tray (Block1)

Timeout in discriminating the tray cart.

Please press READY switch on Feeder Base again. Please contact to the service when to

output the error is continuous.

EUKYX

3-61199-4100

3.4 Tray Feeder (Block1)

Error ID Error Name, Description, Cause, and Remedy

438601 Tray (Servo Error) (Block1)

Error of Power Driver, Over-current

Please confirm Motor wiring, Exchange Motor and Driver.

438602 Tray (Servo Error) (Block1)

Overload Alarm

Please confirm Motor wiring, Exchange Motor and Driver.

438603 Tray (Servo Error) (Block1)

Speed Alarm

You need to re-adjust Motor Gain.

438604 Tray (Servo Error) (Block1)

Multi-rotation Error

Please confirm Motor wiring, Exchange Motor and Driver.

438605 Tray (Servo Error) (Block1)

The value of Deviation Counter was over the set value

Please confirm the wiring of Origin Sensor, or exchange Driver.

438606 Tray (Servo Error) (Block1)

Power Drive detected temperature error.

Ambient Temperature is too high. Or, exchange driver.

438607 Tray (Servo Error) (Block1)

Sensor Error

Please confirm Motor Encoder wiring. Or, exchange motor

438608 Tray (Servo Error) (Block1)

High Drive voltage

Insufficient power capacity. Please exchange driver.

438609 Tray (Servo Error) (Block1)

Low drive voltage

Please confirm the operating Power wiring which is inserted to driver.

43860A Tray (Servo Error) (Block1)

Reading Error on permanent memory

Please exchange driver.

43860B Tray (Servo Error) (Block1)

Reading Error on permanent memory

Please exchange driver.

43860C Tray (Servo Error) (Block1)

CPU Error

Please exchange driver.

43860D Tray (Servo Error) (Block1)

Parameter Error

Please confirm the changed parameter.

43860E Tray (Servo Error) (Block1)

Alarm code readout failed

-----

438701 Elevator Recede position operating error (Block1)

Elevator pre-check error

-----

EUKYX

3-62199-4100

3.4 Tray Feeder (Block1)

Error ID Error Name, Description, Cause, and Remedy

438702 Elevator Recede position operating error (Block1)

Error of calculating Elevator movement position

-----

438703 Elevator Recede position operating error (Block1)

Elevator Start Time-out

-----

438704 Elevator Recede position operating error (Block1)

Elevator movement error

-----

438705 Elevator Recede position operating error (Block1)

Elevator movement Time-out

-----

438801 Elevator comp. position operating error (Block1)

Elevator pre-check error

-----

438802 Elevator comp. position operating error (Block1)

Error of calculating Elevator movement position

-----

438803 Elevator comp. position operating error (Block1)

Elevator Start Time-out

-----

438804 Elevator comp. position operating error (Block1)

Elevator movement error

-----

438805 Elevator comp. position operating error (Block1)

Elevator movement Time-out

Please confirm the operating Power wiring which is inserted to driver.