EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第127页
EUKYX 1-78 199-4100 7.2 List of Servicing Parts 7 . 2 List of Ser vici ng Par ts The fol lowi ng l ist shows the components requiri ng mai nten ance i n severa l years. Use the l ist as a reference . Regar di ng the ma i…
EUKYX
1-77199-4100
7.1 List of Consumables
(a) The recommended number of pieces is the value for reference only.
(b) Refer to “4. Inspection, Cleaning, and Lubrication Spots” in this chapter for component
replacement procedures.
(c) For the cutter blade replacement, consult with our service personnel because it is a
dangerous procedure. When the cutter blade is replaced, also replace the bolt.
(d) The figures in brackets are applied for the multi-functional head.
(e) It is recommended that the nozzle should be replaced every year or every 15 million
shots.
(f) The recommended replacement cycle does not show the product warranty period. The
recommended replacement cycle varies depending on the operation condition or
operation environment of the product.
(g) In the case of consumables, for the malfunction due to an error in the manufacturing
process, we will replace it by a new one for free of charge.
(h) The recommended replacement cycle for the nozzle filter varies depending on the nozzle
type, pattern program data or operation environment.
Note
EUKYX
1-78199-4100
7.2 List of Servicing Parts
7.2 List of Servicing Parts
The following list shows the components requiring maintenance in several years. Use the list as a
reference.
Regarding the maintenance for the following components, consult with our service personnel as
high skill is required for the maintenance.
Block Name Product Name Part No. Part Name Q'ty
Recommended
# of years
Note(a)
Remarks
Head Section
Solenoid Valve KYB-M701U-00 ACCESSORY_SV 30 2
Nozzle Shaft Assembly KYA-M860C-00 SHAFT NOZZLE SET 30 4
For Nozzle
Shaft Setup
Note (b)
O-Ring for Seal Holder
KYB-M704F-00
KYB-M7028-00
SEAL
SEAL
30
90
3
(SO-008-13)
(SO-010-12)
Packing for Nozzle
KYB-M704E-00
26A0279
SEAL 60 3
DYR-2.5
Custom
O-Ring for Filter KYB-M702B-00 SEAL 60 3 SO-009-5A
Slip Ring KYB-M7027-00 SLIP RING 2 2
Light Projecting Unit KYB-M700T-00 LIGHTING UNIT 2 6
Light Receiving Unit KYB-M7016-00 ASSY SVC UNIT 2 6
Coupling for NL KYX-M702C-000
COUPLING
2 -
3-piece set
replacement
Plate for NL KYX-M702C-200
PLATE
2 -
Bolt for NL motor 90112-2AJ012
BOLT HEX.SOCKET
HEAD
4 -
Servo Motor
(NL Motor)
KYB-M701H-00 MOTOR NL 2 2
Main Section
Touch Panel (Both
Sides)
KYB-M651V-00 DISPLAY 2 4
Vacuum Pump KYB-M8518-000 VACUUM_PUMP 1 2 Note (c)
Side View Image
Processing PCB
KYB-M6535-00 PCB-MOUNT 1 6
Component Recognition
Scope
KYB-M731P-00 STD. CAMERA 2 6
Beam Section
X-Axis Motor Servo
Amplifier
KYB-M652Y-00 UNIT-DRIVER 2 3
Note
EUKYX
1-79199-4100
7.2 List of Servicing Parts
Block Name Product Name Part No. Part Name Q'ty
Recommended
# of years
Note(a)
Remarks
Transfer
Section
Positioning Unit Transfer
Pulley
KYB-M91CV-00 PULLEY_TIMING 4 5
Positioning Unit Transfer
Flat Pulley
KYB-M91B8-00 PULLEY FLAT 2 5
Positioning Unit Transfer
Belt
KYB-M919E-00 BELT_TIMING 2 3
Input Machine Transfer
Belt
KYB-M91B0-00 BELT_TIMING 2 3
Output Machine Transfer
Belt
KYB-M91B6-00 BELT_TIMING 2 3
Stopper Cylinder Assembly KYB-M916H-00 ASSY-STOPPER-L 2 4
Input/Output Machine Flat
Pulley
KYY-M914U-A0 PUULEY_FLAT 8 5
Input/Output Machine
Pulley
KYB-M91AL-00 PULLEY_TIMING 8 5
UB95 High-Speed I/O
Board
KYB-M91AK-00 PCB-MOUNT 1 6
Cutter Section Cutter Block ASSY KYB-M3T04-00
ASSY_CUTTER_
BLOCK
2 2 Note (d)
Cart
UC26_Feeder Cart
IO Board
KYB-M371H-00 PCB-MOUNT 2 6
Under the Table UC18_Intensive Board KYA-M8601-00 PCB_MOUNT 2 6
Multi-
Functional
Head
VALVE KYB-M711C-00 VALVE 2 5
Cover Protective Tape KYB-M8607-00 ULTR A _TAPE 1 -
(a) The recommended year of pieces is the value for reference only.
(b) Do not reuse any bolt removed during maintenance.
(c) The vacuum pump is heavy (approx. 22 kg). Pay special attention when attaching/
detaching it.
(d) The cutter block assembly is heavy (approx. 20 kg). Pay special attention when
attaching/detaching it.
Note