EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第142页
EUKYX 2-13 199-4100 2.2 Management Information list Code D isp lay Ar ea A Di spl ay Are a B 30462 Operat ion Requirement AOI feed for wa rd fun ct ion: T he mac hine is c omm unic atin g the n on- output info rmation o …
EUKYX
2-12199-4100
2.2 Management Information list
Code Display Area A Display Area B
30162 Operation Requirement The pattern cannot be switched
30413 Operation Requirement Specify the order No.
30416 Operation Requirement
ACV server does not pass the authorization. Please retry to connect to
server on a screen [UNIT ADJ]-[ACV Set].
3041C Operation Requirement
ACV Check Error. Component ID on the feeder is not same as one
specified by current program.
30420 Operation Requirement
Communications with the ACV server is impossible. After confirming
the ACV server, please retry to perform it. [MAINT]-[UNIT ADJ]-[ACV
ADJ].
30421 Operation Requirement
ACV server is out of condition. Check the ACV server. Check HDD
capacity, database breakage, the condition of each module and
communication between severs.
30430 Operation Requirement
Can not detect Feeder cart (Block1). Please set Feeder cart to the
inside.[B0910, B0911]
30431 Operation Requirement
Can not detect Feeder cart (Block2). Please set Feeder cart to the
inside.[B0910, B0911]
30432 Operation Requirement
The connector of the feeder base (Block1) is not connected to the main
body, so that please connect it. [B0916]
30433 Operation Requirement
The connector of the feeder base (Block2) is not connected to the
main body, so that please connect it. [B0916]
30440 Operation Requirement The Safety cover is open. Please close it.
30441 Operation Requirement
It is impossible to do Pass Operation without Cart because func of
Traceability is valid. Please restart after setting Option invalid.
30442 Operation Requirement
It cannot run because a simple Cover locked. First, set Stage ready
OFF, then set Stage ready ON.
30450 Operation Requirement To run is impossible by start protect.
30451 Operation Requirement
Cannot start to run because the output folder on server is
disconnected. Please check output folder setting and the server status
of output folder.
30452 Operation Requirement
When “Lne Operatin System” is specified besides [LISA], the[Enable
(In Order)] setting cannot be done to “B.C.D.PpChg-P.P.Chng.Func
set”.
30453 Operation Requirement
When “Lne Operatin System” is specified besides [LISA], the[Enable
(BS)] setting cannot be done to “B.C.D.PpChg-P.P.Chng.Func set”.
30454 Operation Requirement
To run is impossible by shortage of components. (Component Remain
Stop Mode: PCB) Please supply the components.
30455 Operation Requirement
To run is impossible by shortage of components. (Component Remain
Stop Mode: Product PCB) Please supply the components.
30456 Operation Requirement
Since the [PCB Finishing Position] data of a Crnt.Prgm is a finish setup
[Sequence], it cannot start (Component Remain Stop Mode). Please
set to the [Output] or the [Input]
30457 Operation Requirement Please start Auto Opn after Comp library data updating.
30458 Operation Requirement The component skip is set up. Please choose other steps.
30459 Operation Requirement
Cannot start to run because the machine event output server is
disconnected. Please check machine event output setting and the
server status of output.
30460 Operation Requirement
Moisture deadline of component has passed.
Please replace the component in the moisture deadline.
30461 Operation Requirement
Customer system cooperation: The machine is communicating the
non-output information of the traceability information. Please wait for a
second, and then operate again.
EUKYX
2-13199-4100
2.2 Management Information list
Code Display Area A Display Area B
30462 Operation Requirement
AOI feedforward function: The machine is communicating the non-
output information of the Inspection information. Please wait for a
second, and then operate again.
30463 Operation Requirement
Cannot start to run because a LCR check is uncompleted. Please
check a target component in a LCR check screen.
30501
Misidentification a type
of Tray
The connected Tray unit (Block1) doesn’t match settings of Device.
Please confirm a type of tray unit, and set it on unit exchange screen.
30502
Misidentification a type
of Tray
The connected Tray unit (Block2) doesn’t match setup of Device.
Please confirm a type of tray unit, and set it on Unit Exchange Screen.
30601
Confirmation of the
position of Noz Stocker
Cannot use Noz stocker from the second to the forth line when full tray
is used. Please set the location of Noz stocker of Device (Block1) on
Unit exchange Screen.
30602
Confirmation of the
position of Noz Stocker
Cannot use Noz stocker from the second to the forth line when full tray
is used. Please set the location of Noz stocker of Device (Block2) on
Unit exchange Screen.
30603
Confirmation of the
position of Noz Stocker
Cannot use Noz stocker from the second to the forth line when full tray
is used. Please confirm the location of Noz stocker of Device (Block1).
30604
Confirmation of the
position of Noz Stocker
Cannot use Noz stocker from the second to the forth line when full tray
is used. Please confirm the location of Noz stocker of Device (Block2).
30701
Confirmation of 2D Bar
code Data
Mark No. of Operating Parameter/2D Bar Code data is specified as All
Skip (0). Please specify proper Mark No.
30801
Detect nozzle coming
off multi-functional
stocker
Machine (Block1) Detected that nozzle has come off the multi-
functional stocker of the 1st line.
30802
Detect nozzle coming
off multi-functional
stocker
Machine (Block1) Detected that nozzle has come off the multi-
functional stocker of the 4th line.
30803
Detect nozzle coming
off multi-functional
stocker
Machine (Block2) Detected that nozzle has come off the multi-
functional stocker of the 1st line.
30804
Detect nozzle coming
off multi-functional
stocker
Machine (Block2) Detected that nozzle has come off the multi-
functional stocker of the 4th line.
30901
Head nozzle dropped
detect
Please lock the main safety cover. Please perform all-zeroing when the
main safety cover has already been locked.
50201
Confirmation of PCB
existence
Remove PCB from the conveyor. Please delete the PCB memory
information on the edit screen if it remains.
50202
Confirmation of PCB
existence
PCB is detected from Input position when Finish mode is set [Output].
Please PCB from conveyor.
50203
Confirmation of PCB
existence
PCB is detected from Output position when Finish mode is set [Input].
Please PCB from conveyor.
50204
Confirmation of PCB
existence
PCB is detected from Inlet sensor of input conveyor. Please remove
PCB.
50205
Confirmation of PCB
existence
The operation mode of Lane A is set [STOP]. Please remove PCB
when not transferred.
50206
Confirmation of PCB
existence
The operation mode of Lane B is set [STOP]. Please remove PCB
when not transferred.
50207
Confirmation of PCB
existence
There is a possibility that there are 2 sheets of PCB on the input
conveyor. Please remove PCB from Deceleration Sensor, or move it to
Stop sensor, or delete the PCB memory information.
50208
Confirmation of PCB
existence
There is a possibility that there are 2 sheets of PCB on the input
conveyor in Lane A. Please remove PCB from Deceleration Sensor, or
move it to Stop sensor, or delete the PCB memory information.
EUKYX
2-14199-4100
2.2 Management Information list
Code Display Area A Display Area B
50209
Confirmation of PCB
existence
There is a possibility that there are 2 sheets of PCB on the output
conveyor in Lane B. Please remove PCB from Deceleration Sensor, or
move it to Stop sensor, or delete the PCB memory information.
5020a
Confirmation of PCB
existence
There is a possibility that there are 2 sheets of PCB on the shuttle
conveyor in input side. Please remove PCB from Deceleration Sensor,
or move it to Stop sensor, or delete the PCB memory information.
5020b
Confirmation of PCB
existence
There is a possibility that there are 2 sheets of PCB on the shuttle
conveyor in output side. Please remove PCB from Deceleration Sensor,
or move it to Stop sensor, or delete the PCB memory information.
5020c
Confirmation of PCB
existence
There is PCB on the input sensor of Lane A. Please return PCB to the
input conveyor and run it.
5020d
Confirmation of PCB
existence
There is PCB on the input sensor of Lane B. Please return PCB to the
input conveyor and run it.
5020e
Confirmation of PCB
existence
There is PCB on the input sensor. Please return PCB to the input
conveyor and run it.
5020f
Confirmation of PCB
existence
There is no PCB in the machine. Please position a PCB.
50210
Confirmation of PCB
existence
Please put PCB on the positioning conveyor, and start it.
50 211
Confirmation of PCB
existence
Please remove PCB from input position. Cutout PCB cannot be
transferred from input position.
50212
Confirmation of PCB
existence
Please remove the substrate at the upstream position. The substrate
for weight to exceed 2.5 kg cannot be transported simultaneously.
50213
Confirmation of PCB
existence
Please remove the substrate at A lane upstream position. The
substrate for weight to exceed 2.5 kg cannot be transported
simultaneously.
50214
Confirmation of PCB
existence
Please remove the substrate at B lane upstream position. The
substrate for weight to exceed 2.5 kg cannot be transported
simultaneously.
50215
Confirmation of PCB
existence
After a PCB disappears from the input conveyor of output machine,
please perform (PCB clip lump prevention).
Please switch on a power supply, when the power supply of output
machine is not on.
50216
Confirmation of PCB
existence
Please cancel positioning of a PCB and perform in the state where
there is no PCB.
50220
Confirmation of PCB
existence
2 PCB are between the input conveyor and the upstream position. Take
PCB in a one side.
50221
Confirmation of PCB
existence
A stop place of a PCB is unsettled. Please establish PCB memory
information.
50222
Confirmation of PCB
existence
A PCB is on the upstream position stop sensor. Please put a PCB in
the location an upstream stop sensor doesn’t turn on.
50223
Confirmation of PCB
existence
It is not possible to operate, because there is a PCB in the upstream
position.
50224
Confirmation of PCB
existence
Please put a P.C.B. in the location a deceleration sensor of a input
conveyor turns on.
50301
Confirmation of
Firmware version
Firmware of transfer driver is not the latest version. Please update it.
50401 Manual transfer
PCB (X > 260 mm) which is set by PP data is unable to be taken in
Input Position.
50402 Manual transfer
Please operate after removing PCB from output conveyor. There is a
possibility of pushing and rising with Stopper.
50403 Manual transfer
It is impossible to take from Sensor Detection of Input Position. Please
put PCB on Input Conveyor, or move it to Output position in Recovery
Menu.